How to make an indoor fountain at home with your own hands? DIY fountain at home: step by step instructions How to make a decorative fountain yourself at home

In specialized stores today you can buy very original. The assortment of such goods is quite large, as they say, for every taste and color. Many people like it when a small trickle of water is heard in the house. These sounds allow you to relax and unwind after a hard day at work. However, most consumers do not know what can be done. In this case, special costs are not required, as, indeed, knowledge.

Material for construction

So, below we will describe how to make a fountain at home. To create an original design you will need:

Glue.
A container that will serve as the basis for the fountain.
Approximate scheme of the fountain
Large sink.
A small piece of hose commonly used for cleaning aquariums.
Polyethylene film.
Expanded clay, decorative multi-colored soil and shells of various shapes and sizes.

A large shell will serve as the centerpiece of the entire composition. A pump and a hose are needed to pump water, and multi-colored soil, shells and expanded clay are needed for decoration. You also need a small piece of plastic wrap. So, expanded clay can be purchased at any flower shop. As for the black, red soil, it is better to use a special mixture for aquariums.

We select the capacity

A home fountain must be strong enough and beautiful at the same time. Therefore, the container for its base should be selected more carefully. The first step in the manufacture of the structure is the selection of the vessel. For the fountain, in this case, you can take a pots for flowers. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, and more.

The most important thing is that the vessel does not leak. If, for example, there are holes in a flower pot, then they should be sealed with epoxy glue.

Choosing a pump

Since everyone can make a fountain at home, it is worth paying special attention to the pump. After all, not everyone understands them. There are several with a spray nozzle and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main container. And one more thing - we have a completely different idea.

Therefore, to make a mini-fountain with your own hands, an ordinary pump will be enough. You can make the tip yourself. In this case, the pump should simply raise the stream up.

First step

So, how to make a fountain at home at no extra cost? First, cut off a small piece of hose, about 10 centimeters long. After that, you need to put it on the pump tip and see if the hole in it is completely open. The power of the jet, which will be supplied to the fountain, depends on this. The finished structure should be installed at the bottom of a previously prepared container.

The home fountain in this case will have a large sink in the center. It is from it that water will flow. Therefore, it is necessary to make a hole in the sink that will fit the hose in size. This can be done using a conventional drill. Of course, the sink should be drilled carefully so that its walls do not crack.

Stage two

The fountain layout is quite simple. With its help, everyone can collect a similar decoration for their interior. When the pump is installed in a container, you can fill in expanded clay, which must be covered with polyethylene from above. A hole for the hose should be made in the foil in advance.

Polyethylene is necessary so that expanded clay does not float when wet. Indeed, water will be poured into the container. After that, multi-colored aquarium soil should be poured onto the film.

Sink stand

The composition will not look good if the main element is simply set on stones. Therefore, you should make a neat stand. So, how to make a fountain at home, which will not only soothe with the pleasant sounds of flowing water, but also be a great addition and highlight of the interior? A beautiful stand can be created from pebbles. They can be held together with epoxy glue. When making the stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, pass the hose through it. If it is too long, then it must be shortened. Otherwise, you will see where the water is coming from. Now you can install the main element - a large sink. Pull the hose only one centimeter into the pre-drilled hole.

That's all, it remains to decorate the fountain. To do this, you should put some shells around the sink and put the most beautiful stones. All this can be purchased in the store - for lovers of aquarium fish or in a gift shop.

If there is no large shell, then it can also be replaced with any suitable item. The main thing is that you can make a hole for the hose in it. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are fixed, water must be poured into the container. It makes no sense to completely submerge the soil. So the fountain will lose its main idea and its charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, you need to plug the cable from the pump into the outlet.

That's all, the homemade fountain for the room is ready. However, it is worth remembering that the water will gradually evaporate from it, especially in the hot season. Therefore, it will be necessary to add liquid to the decorative fountain at least once a week. More often if necessary.

You can mask the cable from the pump that goes to the outlet. Alternatively, the indoor fountain can be decorated with artificial flowers. This will give the composition a more dramatic look.

Finally

Now you know how to make a home fountain. It does not require high costs and special talents to create it. Enough to include imagination. It doesn't take much time to make such compositions, but they will delight you for more than one year.

Who said the fountain is purely a street gadget? Modern decorations of this type are used with equal success both outdoors and indoors - everything is decided by the size and design. For apartments and houses, as a rule, small fountains are used, which are called “home fountains”. It is about them, or rather about the options for their independent manufacture, that will be discussed in this article.

A person can contemplate three things for a long time - for a long time he is not able to tear his eyes away from the flame, flowing water and from how someone else works. For this reason, the most common decorations in houses and apartments are all kinds of fireplaces and fountains. This article will focus on fountains - together with the Dream House website, we will deal with the question of how to make a home fountain with your own hands? We will consider various options for self-making this decor and, most importantly, we will deal with the principle of creating such things, the knowledge of which will allow you to independently design these products at home.

DIY home mini fountain photo

Home fountain: how it works

Most of you will probably be surprised at how simple a fountain is - you can even say that by the standards of modern technology it is an elementary thing that does not cause any difficulties in manufacturing. If you deal with its design, then you can divide it into just a few separate parts. Plus or minus, of course, since there is no limit to perfection, and you can improve it, as they say, ad infinitum.

And as for the principle of operation of such devices, then there is nothing special to understand - the movement of the liquid simply loops around. There is a container from which the pump pumps out water and feeds it into the fountain nozzles - flying out in the form of a beautiful decorative jet or flowing down as a waterfall, it returns back to the same container, from which, again, it is sucked in by the pump and sent to the next ring cycle. This is the whole fountain.

How to make a fountain at home: options

Among the most common options for making home fountains with your own hands, you can single out just a couple of more or less successful designs. To be frank, there is only one completely successful - the first variation, although acceptable for a house or apartment, still has several significant disadvantages.

Depending on the required dimensions, you can install intermediate tanks - create a so-called cascade of waterfalls, which will look much more attractive. The principle of making such fountains is no different from a single waterfall - the only thing that is added here is one or several intermediate containers. In such a situation, water is pumped into the upper tank, from where it flows by gravity into the tank located just below. In turn, water from this reservoir will drain into the container located below - with this approach to business, the number of containers can be unlimited.

Home fountain photo

How to make a home fountain with your own hands: installation without a pump

I will make a reservation right away that this is not a perpetual motion machine, and such a fountain cannot work indefinitely - this is a great toy that clearly demonstrates the work of the laws of physics and nothing more. Depending on the containers used in the design of such a fountain, you can count on 10, 15 minutes, perhaps even half an hour of work time - then you need to recharge, which you will get tired of doing in the very near future.

We are talking about, for the operation of which three containers are required, connected in series with each other by pipes - this is a completely sealed system that works thanks to an air lock. From the receiving bowl, water enters the lowest, and most importantly, empty container - it presses on the air in it, which, in turn, creates pressure in the upper container (it is with water). It is this pressure that makes the water rise upward in a fountain. Most interestingly, the jet lift can be quite large and reach 1m in height. Moreover, this fountain can even be somewhat "automated" - to organize its recharge with less time and effort spent. Undoubtedly, this is a noteworthy invention of mankind, which should be devoted to a separate article, which we will do in the future.

How to make a home fountain with your own hands: Heron's fountain photo

To conclude the topic of how to make a home fountain, a few words about very attractive additions that will allow you to contemplate not only the sight of flowing water, but also to observe various effects. The very first thing that comes to mind here is. It can be organized in different ways, but the most interesting of them is the use of a small electric generator. A small device bought in a store is quite capable of making the LEDs glow - you can arrange them as you like and anywhere, the main thing is not to forget that water and electricity are incompatible things in principle.

Video: making a mini stream yourself
Video: pond, stream for home
Principle of operation

Video: a small version of the stone yourself

Design features
Assembling the structure

Video: an interesting option from a tire

The fashion for fountains for an apartment and a house appeared in our country a long time ago and is currently experiencing its rebirth. A similar decorative technique for decorating the interior of living rooms is today considered an original solution to revive it and give some freshness to the interior space of the premises.

How to make a fountain with your own hands? If there is enough space, it is possible to build a home fountain or a small lake with water lilies - it's all a matter of your imagination and taste.

A home fountain may turn out to be a good technique for arranging little inhabited corners of your apartment (loggias with plants, for example). If the area is small, then you can make a mini waterfall.

Back to content

Video: making a mini stream yourself

Before you start building a waterfall, you should study a number of examples in photos and videos on the Internet, where indoor fountains are presented in all their variety. Having decided on the size (mini or larger version), appearance, design (waterfall, stream, etc.), you can start creating a fountain with your own hands.

Back to content

Video: pond, stream, for home

Back to content

Principle of operation

The indoor fountain is very simple and consists in organizing the circulation of the water mass in a closed cycle, which is carried out by means of a compact electric pump. In this case, the water rises to the collection point, located at a certain elevation, from where it flows or falls like a small waterfall into a special storage tank.

Back to content

Video: a small version of the stone yourself

The choice of the appropriate shape and design for creating a home fountain will, of course, depend on the interior features of your apartment. At the same time, you can always complement the waterfall with well-thought-out lighting and unobtrusive sound accompaniment, so that it turns into a decorative element of your dreams. Home fountains should relax the hosts and decorate the room, delighting the guests. You can look for suitable options in the photo.

Back to content

Design features

The simplest DIY indoor fountain can be made from the following minimum required set of components:

the base on which the indoor fountains are mounted (receiving tank);
standard silicone hose;
a mini pump from an aquarium or another pump version;
a container used as a source (or several to make a waterfall, as in the photo at the beginning of the article).

In addition, for the design of the composition and decoration, you will need decorative soil, expanded clay and other auxiliary materials. Home fountains need to look interesting to decorate the interior. Examples can be seen in the photo.

As a source, you can use a large seashell or an elegant mini jug in which you should drill an inconspicuous hole. It will be needed to install a piece of silicone hose in the "source" through which water will be supplied to this container using a pump or pump. As a base (receiving container), you can use an ordinary flower pot.

Back to content

Assembling the structure

We begin to assemble a home fountain with our own hands by attaching a piece of silicone hose to the pump tip and placing the latter at the bottom of the receiving container. We also put expanded clay here and cover it all with a dense plastic wrap (preferably black), in which we cut a hole and pass a piece of hose from the pump through it.

Back to content

The film will keep the expanded clay from floating when the container is filled with water. Lay a layer of colored decorative primer on top of the film. The do-it-yourself indoor fountain is almost ready.

The source holder can be made of stones glued together with waterproof glue, before passing a hose from the pump through it. After that, you just have to thread the hose through the hole drilled earlier in the source and cut off its excess. Your waterfall, stream, pond is ready!

Similar materials

The most extravagant and interesting decoration of a home or summer cottage plot are reservoirs. A beating stream of water gives a special zest; such a piece of paradise not only delights guests, but also becomes the best place to relax.

You can understand how to make a fountain with your own hands if you study all the nuances of the construction of this mysterious hydraulic device.

Basic rules for installing a fountain

If you decide to make a fountain in the country or at home, then you must initially understand what type and size it will be. It is recommended to design the device of a medium size in relation to the area of \u200b\u200bthe site.

Also note that the size of the fountain will affect the power of the water pump. It is highly undesirable to install it:

Next to a residential building. This can lead to mold on the walls.
Avoid open space. Due to direct sunlight, the water will bloom.
Next to the planted trees. The roots can damage the waterproofing.
On slopes and uneven ground. Choose a lower, level place.

So, a place protected from wind and sun is considered an ideal option. It is good if there is a source of water and electricity nearby.

Types of fountains

If you pay attention to the photos of home fountains, then the following types of typical hydraulic structures can be distinguished:

Fountain with a pump. This is the most popular option among consumers due to its practicality and efficiency. A pump placed at the bottom of the device ensures uninterrupted water circulation.

Open construction. Here water is supplied to the nozzle, due to the difference in water level, a jet is formed. Experts advise installing a water reservoir above the nozzle. This will help regulate the water supply pressure.

Unusual structures

Decorative fountains for the home are not only beautiful, but very original for any interior. Consider a very simple water structure.

For the construction you will need:

large flower pot with pallet
water pump
paints and decorative accessories

Take a pot and make a small hole at the bottom, then install a pump under the pallet, while the tube itself must be passed through the hole made.

We paint the pot itself in the color we like with the help of paints, fill the bottom with pebbles, decorate with all possible decorative elements, for example, artificial figures. Finally, fill the container with water.

So, a mini fountain with your own hands is ready. You can emphasize its uniqueness by equipping it with backlighting, this will give a unique and slightly magical atmosphere in the evening.

Beautiful waterfall

The do-it-yourself fountain waterfall looks very elegant. It is a mistake to think that only a professional can make such a structure. A beginner master can also perform a wonderful creation.

To make a one meter high cascade waterfall, you need the following:

The initial stage is digging a pit under the water bowl, while it is necessary to build a rammed embankment in the form of a slide. Such a simple manipulation will help make the hill.

The stage of waterproofing - for this, we cover the bottom and, accordingly, the walls of the pit with a special non-penetrating material, while laying the canvas on the sides with a margin of half a meter.

Then we stretch the pipe for supplying water through the hole so that its end is at the top of the planned waterfall (we bend the edge by 30 centimeters).

At the bottom of the pits, lay out a metal mesh, then fill it with concrete, approximately 15 centimeters. The walls of the pond bowl are also recommended to be concreted. We leave the structure unchanged for a day.

We decorate the building. To do this, on a rammed slide, we make three steps in increments of thirty centimeters. We decorate a smooth surface with decorative colored stones, pebbles, etc. We cover the film around the perimeter with any material that you like (for example, rubble, marble).

In conclusion, we turn on the pump, fill it with water. We enjoy our work, watching the water streams evenly fall down the steps of the home waterfall.

DIY fountain photos

Making an indoor fountain will not take much time, while it will be possible to save a significant amount and, as a result, get a beautiful interior decoration. If you believe the practice of Feng Shui, then the location of the waterfall on the northwest side of the house will allow the family to live in prosperity for many years.

DIY home fountain

The construction of small cascades that will decorate the interior should be carried out thoughtfully, since it is important to realize that there is nowhere for water to drain. This means that the liquid inside must be present in the same amount. In other words, cyclicality is required. Water accumulates in storage containers. A pump is installed in the system to raise the liquid to the top of the waterfall, and from there it will freely penetrate back into the container.

In order for the streams to turn out beautiful, several decorative obstacles should be installed on the drainage path, for this pebbles, shells, and so on are suitable. To make the home fountain beautiful, it is worth making several rapids with recesses. This will produce the characteristic sound of falling water.

Preparation for work

To make a fountain with your own hands at home, you must first select a pump. The power of the device will depend on how high the water will splash. Everyone selects this value independently based on the design option. For the construction of a fountain with water gushing upwards, a pump is required, which will have a high power and a regulator. And for a small cascade, an aquarium-type pump is enough to filter the liquid.

Before starting work, need to stock up:

reservoir;
tubes;
glue;
decor items.

The storage bowl should be large in size. She will fulfill her direct duties, collect liquid, and, moreover, will become the basis of the entire fountain. Some pebbles can be placed directly inside the container.

Making a pump

Making a low-power pump everyone can master it. To make it you need to use:

the motor from any object, while it must protect against moisture penetration;
batteries;
charger connector when using a mobile phone;
several LEDs;
toggle switch;
electric drive;
gears;
a small rounded container;
waterproof glue.

Using a gear, an impeller is made, which will supply moisture. On the bottom of the container, you need to make a hole where to insert the motor shaft. An incision is also made on the side for the liquid. Install the motor shaft in the container, glue the main part of the motor to the bottom of the container, the impeller is attached to the shaft. Then a small part of the plastic is cut off, in which a hole is made, the open area of \u200b\u200bthe pump is sealed. A tube is attached to the side hole and sealed. Then you need to connect the wires to the motor and insulate them using ordinary sealant.

When installing batteries, be careful not to get moisture in them. The fastening is done on the outside of the pool, a tumbler is also installed here.

Assembling the composition

To make a home fountain with your own hands assemble correctly, it is necessary to attach a home-made or store-bought pump to the bottom of the storage tank. In depth, the reservoir must be selected so that the pump is completely immersed in the liquid. The pump can be masked in several ways, for example, by putting a mesh cover on top of which pebbles will be poured, shells can also be used.

The dry fountain method can be used, with no water visible on the surface. This is achieved by laying the grating and securing the stones. Penetrating through stones, the liquid will not form a visual pool, everything will accumulate in the container.

Can build fountainsto for home, using ceramic pots... This is quite realistic if you follow some recommendations:

This miniature composition is installed on a table or in a special corner, next to indoor plants. Such a fountain can be an excellent addition to the decor, as well as an air humidifier in the apartment.

Original waterfalls

Vertical type waterfall is a stylish and fashionable decoration in any interior. It takes more time and effort. The difference in the compositions of the desktop and vertical type is the pump, which should be much more powerful. When choosing a pump, you should pay attention to the pump, it should raise water to a height of about 2 meters. Thus, it is possible to achieve the arrangement of the waterfall, in which the top will be located under the very ceiling.

Before proceeding with the main work on the construction of the fountain, you should take care of waterproofing the floor surface. You can use plastic wrap. It is better if it begins to cover an area slightly larger than the capacity of the structure.

To prepare a panel that will be used for draining water, you need to use some materials. It is desirable that they are of high quality, and the life of the waterfall will be longer.

Install the pallet and fix the board, on which the glass will be fixed vertically. Using the support bars, the frame is knocked down, on which the crossbar is fixed.

Then make holes in the water supply not very far from one another to get a view of the integrity of the waterfall. If they are placed at a more distant distance, then several separate streams will be obtained. Produce a tube end cap and attach it to the top of the cap. If you wish, carry out the backlight.

Place the glass panel in the lower area of \u200b\u200bthe latch and position it vertically. Using liquid nails, attach to the boards on the side. To prevent the liquid from spreading, strips of glass or plastic are installed on the edges.

The pump is installed in a pan, a tube is brought to it in order to supply the liquid upward. After connection, the connection is treated with a sealant. Attach the front cover. Then they move on to decorating the fountain based on their own preferences.

There is a huge selection of materials for decorating indoor fountains and waterfalls, you can buy them at any pet store. Various flower boutiques sell bamboo poles as well as original containers and tanks. Visiting the souvenir shop, you can buy figurines and bonsai.

How nice it is to sit in a comfortable chair and enjoy a pleasant rest, watching the drops of water flow down. A fountain or home waterfall will delight the eye, and the murmur will soothe and relax. If you put several living plants around the fountain, you get a picturesque picture.

It is worth considering the attractive additions that can be used to decorate any structure. First of all, of course, we are talking about backlights. They can be different, with an iridescent effect. The most commonly used electrical generator. To do this, you need a small device purchased from a store, it will do the job and make the LEDs work.

You can arrange elements in any quantity and in different places, the main thing is to remember that water should not get on them. After all, this is still electricity, so you should take care of safety measures.