Can cherry ondulin roof be painted brown? Tips for installing ondulin roofing Is it possible to paint ondulin

Ondulin is one of the most common roofing materials, which has a long service life and an attractive appearance. Corrugated bituminous sheets are positioned as practical to use and do not cause difficulties in installation. They are made from modern raw materials with the use of cardboard and cellulose fibers, polymer webs, which explains their widespread use. Their only weak point is the loss of color under the influence of ultraviolet rays (burnout). To keep the roofing material presentable, you will need ondulin paint and simple work.

Is it possible to paint ondulin

It is possible to paint ondulin sheets in order to return them to their previous appearance or completely change the design. It is important to use the correct paint from trusted manufacturers. The instability to the negative effects of sunlight often forces the owners of the ondulin roof to periodically paint.

Such an unpleasant moment as color fading occurs as a result of the destruction of the pigment that gives the desired color to the coating. Not only the dullness and fadedness of ondulin is its minus, but also the unevenness of the implementation of this process. Such a roof on a building loses its decorative qualities.

There are 2 types of roofing products on the building materials market, which differ in painting technology:

Attention! The high popularity of ondulin sheets ensures its safety and environmental friendliness. All components of the material do not emit any toxic substances, do not harm either the external environment or human health. It is this factor that distinguishes ondulin from other roofing materials containing harmful impurities.

Among the positive characteristics of ondulin are:

Relatively light weight - 6 kg per sheet. Due to the lightness of the material for arranging the roof, it is enough to build a simple truss structure and lathing. Remarkable is the fact that it is possible to use ondulin sheets without having to dismantle the old coating.
High level of durability. This parameter provides the fibrous structure of the material. The sheets are capable of withstanding a snow load of up to 300 kg / m 2.
High degree of resistance to the negative effects of water. Bituminous impregnation does not allow the roofing material to absorb moisture.
Long service life - up to 25 years. The advantage of ondulin is the preservation of its original working qualities under conditions of sudden temperature changes. The manufacturer gives a guarantee for products up to 15 years, and if you monitor the condition of the roof, then this period can increase to 30-40 years.
Resistance to fungi, mold. Petroleum bitumen used in impregnation is distinguished by strong antiseptic properties, which does not allow pathogenic microflora to multiply.

How can you paint ondulin

To return the previous appearance to the ondulin roofing material, it is necessary to cover it with a special dye composition. Correctly selected paint can improve the color and increase its level of moisture resistance. When choosing a composition for staining, preference should be given to options with similar characteristics as ondulin. Among the suitable paints, the following are considered in demand:

Ondupaint. This paint is specially designed for painting bituminous sheets. This high-tech product is made on the basis of a silicone and acrylic mixture. The homogeneous suspension contains pigments and special components that are resistant to ultraviolet rays and atmospheric precipitation. This homogeneous viscous liquid, after drying on the surface of the sheet, forms a strong film.

The indisputable advantage of this paint is the fact that it is produced by the same manufacturer as ondulin. These two products are fully compatible. Only a small drawback of Ondupate is its limited range of colors - there are only 4 colors on the market: green, dark, red, brown. The drying time of the applied layer is 4 hours, and it lasts 5 years without loss of quality.
Acrylic paint. The main component of this paint is water-dispersed polyacrylate, which, after complete drying on ondulin, leaves a film resistant to external factors. Acrylic paint has similar properties to bitumen. Its advantage is its relatively low cost when compared with a specialized formulation from the French manufacturer Onduline. Color retention is only 2-3 years, which requires frequent use. Among the positive characteristics of acrylic paint, a huge assortment of shades is also distinguished, which allows you to choose the best option without any problems.
Bituminous mastic.Due to the similar composition, bituminous mastic is ideal for painting roofs made of ondulin sheets. Liquid rubber on the treated surface forms a thick, durable layer that effectively withstands adverse environmental factors. If we compare the cost of bitumen mastic and acrylic paint, then it will be somewhat more expensive, but in relation to Ondupate it will be cheaper. Liquid rubber stays on the roof for 3 years. The color palette is quite varied. The drying time for bitumen-based paints is 2-3 hours.

Attention! To achieve the desired result, it is not enough to choose the right paint, you need to know the basic subtleties of the roof renewal process.

Before you start painting the roofing material, you need to make a set of preparatory measures. Do not allow dust particles, various kinds of pollution to remain on the surface. They must be removed and the roof slope can be cleaned with water and a plastic-lined brush. When the sheets of ondulin dry up, it is recommended to prime them, and only then apply 1-2 layers of paint. Basically, 250 ml of the selected composition is consumed per square meter of surface.

As tools necessary for the work, you will need: a roller, a brush or a spray gun. The optimum air temperature for applying paint to the ondulin roof should be no more than 20 degrees. Drying time of the first layer in this case will be 2 hours. If it is cool or high humidity, the drying time is increased to 4 hours.

With a competent approach and adherence to the application technology, the coating has a high degree of elasticity. Even at subzero temperatures, it does not undergo cracking, it has a sufficient level of resistance to atmospheric phenomena.

Conclusion

Ondulin paint must have properties similar to the material itself in order to effectively withstand adverse environmental factors. It is also recommended to select a primer and color from the same brand. Before use, you must read the manufacturer's instructions and act in accordance with them. Given that painting the roof has certain risks to life, work should be carried out in compliance with safety rules.

The question of choosing a roof for a roof is a key question that arises in almost all people when building a house. After all, the roof not only protects housing from weather troubles such as snow, rain, hail, scorching sun, but also gives the whole house beauty and uniqueness. Currently, the choice of building materials is so extensive that you can create a roof of almost any shape and any color - it all depends on the wishes of the customer, his financial capabilities and the designer's fantasies.

Ondulin is one of the most popular roofing materials today.

Ondulin is one of the most popular roofing materials today. Roofs covered with ondulin can be found in almost any cottage village. Ondulin, aka Euroslate (the name "ondulin" came to us from the name of the manufacturer of this material in Europe), is a corrugated sheet of cellulose fiber and various mineral additives, impregnated with bitumen. Of course, ondulin, like any other material, has its own advantages and disadvantages.

Most often associated with its unstable appearance, namely, with fading of color in the sun.

Therefore, in this article we will try to answer the question of how to paint ondulin, since this is one of the main problems of the roof restoration process. But first of all, let's consider the main advantages and disadvantages of this roofing material.

The main advantages and disadvantages of ondulin

The main advantages of ondulin include the following:

environmental safety - ondulin does not contain substances harmful to humans and the environment;
high level of noise insulation;
lack of condensation, subject to correct installation;
resistance to corrosion and chemicals;
biological resistance - the material does not rot, it is resistant to bacteria and fungi;
low water absorption;
long service life - about 50 years;
ease of transportation and installation due to the low weight of the material.

Of course, in addition to all the above advantages, ondulin has some disadvantages:

flammability of the material;
limited choice of colors;
color instability due to sunburn.

Very often housebuilders refuse to choose ondulin precisely because it quickly loses its appearance, as it fades in the sun. But for many, this is not a significant problem, because this roofing material can be painted.

Ondulin roof painting

Annotation to ondulin contains information that in the manufacture of this material, the sheets are painted before being impregnated with bitumen. This is done to ensure that the color of the material is UV resistant. And ondulin of the "luxury" class is subject to painting even after bitumen impregnation. Thus, Euroslate can retain its original color for a very long time.

The best tool for cutting ondulin is an ordinary wood saw.

But in practice, it often happens that the color of ondulin, under the influence of natural phenomena, fades and becomes faded and ugly. How to act in such situations is not indicated in any instructions for the material. And not a single manager and dealer specializing in ondulin will give clear recommendations and advice on this matter. But, nevertheless, ondulin can be dyed, some people practice it and share their experience in this difficult matter.

First of all, you need to choose the right paint. It must be weatherproof and resistant to UV rays and corrosion. It is best if ondulin is painted with a special industrial roofing paint made by leading manufacturers of paints and varnishes.

Due to the fact that ondulin is a roofing material made with bitumen, the paint should be chosen based on bitumen. For example, the Finnish manufacturer Tikkurila offers a matte finish “Killi” for bituminized fiber boards, fiber cement, roofing material, etc. This coating is weather resistant, so it can be used in maritime climates.

The color of the paint can be selected from the catalogs of the Tikkurila company. Paint consumption - 250-500 ml / m 2 for coating in 2 layers. To apply the Killy coating, a paint brush or roller is used. The paint dries at a temperature of 23ºC for about 2 hours. If the air is too humid, the paint will take longer to dry. This coating is very elastic, does not crack in cold weather, and is resistant to water. It will not be superfluous to recall that before painting the roof must be thoroughly rinsed, cleaned of branches and debris.

Roofing painting is a tedious task and requires a lot of effort to achieve the desired result. Ondulin painting can be done both independently and with the help of involved specialists. But it is best to initially approach the issue with special responsibility and seriousness. Very often, ondulin is faked, and it is the fake that loses its original appearance faster. Thus, carefully study the manufacturers in order to avoid the procedure for repainting the roof later. In any case, the choice is always yours! Good luck!

To have an accurate answer to this question, you need to know:

firstly, what is it made of so as not to apply paints based on such a solvent that Ondulin can dissolve, and therefore destroy;
secondly, what is the degree of adhesion (adhesion) of the molecules of two materials - a particular paint and Ondulin;
thirdly, how environmentally friendly the painting material is, in order to be sure that it will be possible to water flowers and tomatoes with rainwater from the roof, as before, before painting;
fourthly, how resistant the paint is to the ultraviolet radiation of the summer sun.

Properties and composition of the roof Ondulin

The material from which Euroroof is made consists of bitumen (oil product), cellulose fibers (wood), minerals (mainly based on silicon), resin hardening from temperature (in fact, technical rubber), mineral pigments-dyes.

In the process of obtaining this composite roofing material, cellulose fibers are saturated with a colloidal solution of pigments, crushed rubber and minerals in bitumen and harden at high temperatures. Therefore, Ondulin has the following useful consumer properties:

Low wettability and insolubility in water.
Flexibility.
Not a high specific gravity of the material.
Resistant to the effects of microorganisms and fungi (bitumen is an ideal antiseptic).
High manufacturability of installation.

The presence of these excellent construction and consumer qualities of Ondulin at the same time means that good adhesion (adhesion) to it from most types of paint cannot be expected, because aggressive solvents simply destroy the organic compounds that Ondulin consists of.

Water-dispersible polyacrylate (acrylic paint)

And it turned out that the easiest way to paint bituminous Ondulin is water-dispersion paints. True, modern paints and varnishes are fundamentally different from classical ones. Copolymers and polyacrylates with short molecules dry to form stable, water-insoluble solid consistencies that have liquid properties. In this they are similar to bitumen. That is, when two solid quasi-liquids come into contact through an interlayer of water, their molecules enter into dispersion bonds and interpenetrate.

And the bitumen-rubber surfaces of the roofs, which are problematic to paint with compositions based on aggressive solvents, can be easily coated with compositions that have similar properties to conventional water-based paints.

New products from the Ondulin company

It should be noted right away that Ondulin roofs practically do not change their color in the sun, since solid pigment mineral (inorganic) particles cannot burn out. Products Ondulin loses the freshness of its color due to impurities that are absorbed into its upper layer due to the presence of water-soluble acidic compounds in industrial dust. They are difficult to wash off, and even more so not with water. And why do this if it's easier to repaint and refresh the roof.

For these purposes, a special water-dispersion paint with a silicone-acrylic composition was created by the company producing Ondulin. When dry, this quasi-liquid has high adhesion (adhesion) properties with a very wide range of synthetic and natural materials. Acrylic itself and silicone inclusions are inherently related to the components that make up Ondulin. Therefore, this new paint was named Ondupaint.

As in Ondulina, the color of Ondupain is determined by pigment mineral inclusions that are not subject to decay under the influence of the ultraviolet radiation of our daylight. After drying, which occurs at positive temperatures in no more than 4 hours, a strong and water-repellent film is formed on the painted surface. It is also elastic and retains this property in wide aisles of negative temperatures (up to -50 * C).

Working with Ondupaint paint is easy. It is ready for use immediately after leaving production. It can be applied to the roof surface with a spray gun, roller or brush. Depending on the condition of the surface to be painted, Ondupain is consumed in aisles of 100 - 150 g / m2. After drying, if necessary, you can paint again, eliminating blemishes. Differences in the color of the plots will not be noticeable at all.

The Ondwynt company produces the same standard colors as Ondulin, that is: green, brown and red. The paint is universal in its application. It can cover not only Ondulin, but also metal, stone, brick, slate, protecting them with a water-repellent thin layer.

The manufacturer gives a 5-year warranty for its paint, but in practice it lasts much longer. So today the question is - how to paint Ondulin rabbit? - disappeared.

Experienced roofers often choose ondulin, a roof decking material that is lightweight and durable. But it has one significant drawback - over time, it begins to fade under the influence of ultraviolet radiation. Ondulin painting allows you to maintain the appearance of the roofing surface.

Ondulin characteristics

In 1944, a French company began producing ondulin. Initially, this material was intended to eliminate leaks in roofs covered with slate, tiles or corrugated board. Over time, ondulin from the manufacturer of the same name became an independent product. Such a euro-slate is inexpensive, practical, and looks quite attractive on the roof.

This material is realized in the form of rectangular sheets with a size of 205x305 centimeters and a wavy profile. It is produced exclusively from natural raw materials:

refined cellulose fibers;
petroleum bitumen;
natural pigments;
various modifiers.

Advantages of an ondulin roof

The popularity of the use of ondulin is explained by a number of its characteristics:

Low weight. A sheet of material weighs only 6 kilograms, which makes it lighter in comparison with other types of roofing products, due to which a simple truss frame and lathing are enough for installation. The weight of ondulin makes it possible to lay a new coating without dismantling the old one.
Strength. This property is due to the presence of a fibrous structure in the material. Ondulin is able to withstand a snow load of 300 kg / m².
Waterproof and low water absorption. The material is resistant to water. It does not absorb moisture due to the presence of bitumen impregnation.
Long operational life. Ondulin is able to withstand 25 cycles, during which it first freezes and then thaws, while not changing the structure and not losing its original properties. According to the manufacturer's warranty, the lifespan reaches 15 years. If properly cared for, the coating will last at least 30-40 years.
Resistance to microorganisms. As you know, ondulin is impregnated with petroleum bitumen, which is a powerful antiseptic and for this reason, a roof with such a coating cannot be damaged by fungus and mold.
Environmental Safety. The components used for the production of ondulin do not adversely affect human health and the environment, and this circumstance distinguishes it from other roofing products, which may contain harmful impurities.

The negative effect of ultraviolet radiation - color loss

A significant drawback of ondulin is its instability to ultraviolet light. When the sun's rays hit the roofing surface, the pigment from this material begins to break down, which gives color to the coating.

As a result, ondulin becomes dull and faded, but the most unpleasant thing is that this process takes place unevenly. As a result, the destruction of the pigment leads to a decrease in the decorative qualities of the coating - the appearance of the roof deteriorates. But is it possible to paint ondulin?

Two types of this material are produced, which differ in the dyeing technology:

Economy class... In the manufacture of roofing products, the sheets are painted before being impregnated with bitumen. This method allows you to hide a destructible pigment under a protective layer. As a result, ondulin retains its color for 6 to 8 years and is much cheaper.
Luxury class... During the production process, products are subjected to the dyeing procedure 2 times. The first time paint is applied to them before the ondulin is treated with bitumen, and the second - after. The material is able to maintain color saturation for 10-15 years, but the use of an additional layer of paint increases the cost of production.

Another disadvantage of ondulin is the small number of color options. The material is made in only four shades - black, brown, red and green. The limited color palette forces many owners of private houses to think about solving the problem, how to paint the ondulin roof.

Choice of paint - the better to paint

A problem such as color loss with ondulin can be easily dealt with. When the roofing coating completely loses its color and fades, its sheets are covered with special coloring compounds that improve its appearance and at the same time increase the moisture resistance of the roof.

Ondulin paint should have properties similar to those of the coating in order to withstand adverse climatic influences throughout the entire operational period. But in the construction market, there are few suitable options.

As a result of the limited supply of coloring compositions for ondulin, they use:

"Ondupaint"... The paint is produced specifically for painting this material based on silicone and acrylic. After drying, a strong film forms on the roof surface. Since this paint is produced by the manufacturer of ondulin, compatibility is guaranteed. But Ondupain's color palette is also limited to 4 standard shades. It takes only 4 hours to completely dry the paint, and its service life is at least 5 years. The disadvantage of this option is the high cost, this paint is more expensive than similar compositions.
Acrylic paint... It is made on the basis of water-dispersed polyacrylate. When dry, after applying acrylic paint, a film is formed on the roofing surface, insoluble in water and similar in properties to bitumen. Its cost is cheaper than the composition of Ondupain, but it keeps on covering for only a few seasons. The advantage of this option lies in the huge choice of colors. The use of acrylic composition allows you to paint the roof in any color.
Bituminous mastic... It is also called "liquid rubber". Due to the compatibility of the formulations, mastic is a better choice than painting ondulin if you need to update the roofing. When applied on the surface of the material, a strong film is formed that resists weathering. The bitumen-based coloring composition is more expensive than acrylic paint, but cheaper than Ondupaint. Its service life is approximately 3 years. All shades that are included in the bitumen mastic color palette are matte. The composition dries quickly, only 2-3 hours.

For optimal results, the roof surface must be properly prepared. First, the slope is cleaned with water, sometimes a brush with plastic fibers is required. After drying, the onduline surface is primed and painted in one or two layers.

Often ondulin is chosen as a roof for the roof, and many people are interested in the question of whether there is paint for ondulin and whether it can be painted. It will be much easier to choose the material of the required color, but if this is not possible, then ondulin can be painted in the desired color. Acrylic, vinyl, epoxy vinyl and other paints are suitable for these purposes. The only condition is that they dry for 2-3 hours.

Ondulin composition: 1 - mineral dressing, 2 - bitumen, 3 - fiberglass, 4 - bitumen, 5 - silica sand.

A roof covered with ondulin can be found very often, since it is very popular. This material got its name from one of its first manufacturers. It is a sheet that resembles slate in shape (but it is made of cellulose fiber with the addition of mineral components), after which it is impregnated with bitumen. The material is presented in a wide range of colors, but it is still sometimes necessary to use ondulin paint to get the shade of interest.

Like any other building material that is used for roofing a roof, ondulin has its advantages and disadvantages, before choosing it to cover the roof of your house, you need to familiarize yourself with them.

Main advantages and disadvantages

One of the main problems that can arise with this material, many experts say, is that over time its color can change, and then, when restoring the ondulin coating, the question arises of how to paint the ondulin. It happens that the quality of the coating is good, but the owner had a desire to change the look of his house, and he decided to change the color of the roof.

The advantages of this type of coating:

it contains no harmful substances, so this material is environmentally friendly;
it has good noise insulation characteristics, so noise from the street does not enter the house;
if the installation is done correctly, then condensation does not form on the surface;
resistant to the action of various active elements and corrosion, does not rot and is not covered with fungus;
has little water absorption;
its service life is 50 years or more;
has a low weight, which makes it easy to transport and install.

Despite the presence of a large number of advantages, like any other building material, ondulin also has some disadvantages:

the choice of its colors is limited;
over time, in the sun, the material fades and loses its original color;
flammability.

It is often the fact that the specified material loses its color over time that stops some people when choosing it as a roofing material. This will not be a problem for you if you know how to paint ondulin, after which it acquires a bright color again and will perform its functions with high quality for more than a dozen years.

Back to the table of contents

Ondulin roof painting

If you look at the manufacturing technology of this material, you will see that the sheets are painted in the desired color before they are covered with a layer of bitumen. This is done in order to protect the sheets from burning out under the influence of sunlight, namely ultraviolet light.

Modern luxury material is painted both before and after impregnation with bitumen, which allows it to retain its original color for a longer period of time.

For painting ondulin, it is necessary to take an atmospheric paint that is resistant to fading and corrosion.

Under the influence of natural factors, after a certain time, the color of ondulin becomes paler and dull, but this is not a very big problem, since the specified material can be painted and returned to its original appearance again.

For painting ondulin, it is necessary to take an atmospheric paint that is resistant to fading and corrosion. Since the composition of this material includes bitumen, the paint must also be taken on a bituminous basis, a special roofing paint is best suited.

When choosing a paint, it must be borne in mind that it must be designed for coating bituminized fiber boards, roofing felt and similar coatings and be weather resistant. As an example, we can point to the well-known Finnish manufacturer Tikkurila, which offers the Killi paint. The Ondulin company offers Ondupain paint for these purposes, but you can choose any other manufacturer with suitable paint characteristics.

After you decide on the paint manufacturer, you need to choose the shade you need, for which you can use the catalogs. This coating must be applied in two layers, the paint consumption is approximately 250 ml / m 2.

Ondulin can be coated with a roller, brush or spray gun. If it is warm outside and the temperature is more than 20 degrees, then 2 hours is enough for one layer of such paint to dry. At lower temperatures or higher humidity, the drying time can increase up to 3-4 hours.

A feature of such a coating will be that it has high elasticity, so it will not crack even in severe frosts, it is also resistant to precipitation. Before starting painting, do not forget to thoroughly clean the surface of debris and rinse it well, then let it dry completely.

You can paint the roof yourself, but if you do not have free time and have extra funds, you can hire specialists to do this. When choosing a roofing material, you need to pay attention to its quality, since now there are a lot of fakes. If you buy a high-quality ondulin, then it will serve as a quality roof covering for a long time and reliably, and you will not have to address such an issue as painting it.