A one-way curtain for the kitchen and bedroom is the perfect solution. Sewing a lambrequin: from creating a pattern to forming a finished product Lambrequin made of dense fabric with your own hands

Lambrequin is a decorative part of the curtain that can hide a not-too-remarkable cornice. Beautiful lambrequins give the image of the window completeness, consistency, are a worthy setting for its top.

Making lambrequins can begin with curtains in the kitchen. The window there is usually smaller than in the living room. Therefore, less tissue will be required, and making such a lambrequin, in general, is easier.

You will need the following materials and tools:

• Fabric - the main and, if desired, lining;
• Gasket made of a material such as non-woven;
• Plank for a pelmet length with a cornice;
• Decorative cord - 1m;
• Pencil;
• Furniture nails, hammer;
• Screwdriver, screws;
• Drill;
• Half a meter of tape.

The hammer can be replaced with a furniture stapler. The pelmet for kitchen curtains can be done in ten steps.

Simple pelmet to the kitchen:

• On the window you need to fix the bar 10 cm above the window opening, the margin on the sides will be the same;
• The fabric is cut along the length of the cornice + extra 10 cm;
• If you need to sag drapery, for example, by 50 cm, then the fabric will need 70 cm;
• Seam allowance for drapery - 1.5 cm;
• To make the lambrequin tough, you need a gasket and, if desired, a lining - they are cut according to the pattern of the main fabric;
• All layers are chipped with pins and sewn, 30 cm along the upper edge remains;
• Pins are removed, twisted, manually sewn a lambrequin;
• The middle of the lambrequin and the straps are connected by a stapler;
• The remaining fabric is attached to the plank, the ends on the sides should hang down;
• The ends on the sides are ponytails that are tied with a decorative cord half a meter on each side.

It remains only to tie bows and folds. Lambrequin for kitchen curtains is ready!

Pattern and sewing curtains with a lambrequin step by step (video)

Lambrequin for beginners: scheme and calculation

If you are still in the status of novice masters, you will need schemes for the future lambrequin. This is important both in order to be oriented and for the correct calculation.

You can draw a diagram in a scale of 1:10.

And now about how to calculate the fabric on the pelmet for curtains:

• Suppose you decide to make a pelmet with swag. Swags are such decorative elements of a curtain that resemble an inverted arc in shape. If a lambrequin is sewn for curtains in the living room, there can be four swags - this is an average. Three swags will be big, and five - on the contrary, will be small.
• You need to calculate the length of each element, wondering how many one swag will go on the next. This is done according to the drawing on a scale or you will have to remember algebra, and make an equation.
• Consider this calculation can be an example. Let the length of your ledge 3.6 m (one of the most popular). And you need to make four swags for curtains, so that each overlaps the neighboring one-third. Three intersections of one third will become the length of one swag, it turns out that the length of the cornice of 3.6 m should not be divided into four parts, but into three. It turns out that the length of one swag is -1, 2 m.

Designers always make several lambrequin patterns for curtains, and only then choose the one with which to work.

Assembling equilateral swag pelmet (video)

DIY lambrequins

Suppose you decide to sew a simple, soft pelmet for curtains. Making it will do without additional decor, such as the same swag and decorative braid. Again - an option for beginners.

Manufacturing technology will be simple:

• Complete all calculations. Remember that the height of the lambrequin is also an allowance for seams, and the width is the length of the cornice and the assembly coefficient. If the folds need light, then the coefficient is 1.5.
• Next, you need to cut the fabric so that a rectangle of the desired size is obtained. Work on the edges of the rectangle.
• Sew the curtain tape onto the top of the part.
• Assemble by pulling the desired threads of the curtain tape.
• It remains only to hang a pelmet for this curtain on the ledge.

If such a manufacture of a lambrequin still asks for decor, decorate the bottom with fringe, lace or a beautiful braid.

Lambrequin do it yourself in the nursery

Curtains in a children's room always differ in design, color, and presentation. Today, pelmet for such a curtain, made in the form of a large application, is in fashion. In fact, you can just sew a regular lambrequin for curtains, only without creases and asymmetric. This will be a piece of sky, which is naturally located at the top of the curtains. And on this lambrequin you need to sew the sun and clouds, or vice versa, the moon and stars.

It can be simple lambrequins made of dense fabric, combined in color with curtain fabric, while lambrequins are attached to the cornice with loops. The fabric can also be applique - the sun, flowers, heart, baby name, etc. Such lambrequins for curtains will be both rigorous and cute. For example, curtains fuchsia and pelmet without folds, a tone lighter.

Asymmetric lambrequins are not easy to sew, and some craftswomen add a knitted lace to the fabric strip of the lambrequin.

Lambrequin from the square (video workshop)

Lambrequin is a nice decorative detail, which, depending on the purpose, can make the window either more comfortable, or grandiose, or austere, or tender. Successful undertakings and accurate calculations!

DIY pelmet (photo)

To decorate the wall section between the window opening and the ceiling, the designers invented the lambrequin.

This is a strip of fabric material that is mounted on a cornice. Curtains with a lambrequin look much more harmonious, the image looks completely completed.

In addition to its decorative function, lambrequins also serve as a means of decorating cornices, which have an unaesthetic appearance.

If it is necessary to emphasize any stylistic direction, for example, baroque, then such textile designs will become the main assistants.

In addition, a set of curtains with a lambrequin visually raises the ceiling, expanding the window space.

There are several styles used to create lambrequins. The classic remains the most popular, but today it has undergone some modifications.

Classics are a narrow strip of matter that is gathered with folds using a curtain tape. There are three forms of assembly: straight, arched and undulating. Most often it is used to decorate the window slope at the top or cornice.

Combined is a combination of classics and a tough and fantasy type of tailoring. Only real professionals know how to sew curtains with lambrequins of a combined type, so they are usually sewn in salons.

Classical curtains - not always complex curtains with ornate pelmet, suit the style of the interior. For example, country style accepts the use of only lightweight materials for window decoration.

Complex curtains with lambrequins consist of several parts that are created through various assemblies and draperies.

Curtains for the living room with three swags - a semicircle is called a swag, which is formed due to the throwing of a fabric strip through the cornice. This window opening design option is great for the living room, but it is better to use this combination on multiple windows in one room at once. A tubular window cornice is suitable for throwing.

Jabot - curtains lay asymmetrically. This design is best used in bedrooms. Jabot can have both two-sided location on the window, and can be directed in one direction.

Cocktail - with this combination, the canvas is located in the center of the window between a pair of swag. The best curtains with lambrequins for the hall are just such complex symmetrical designs.

The traditional finish at all times is considered to be fringe. She trimmed the curtains in the living room.

Festoons are called soft fabric tabs during window decoration, thanks to which you can create stylish unique curtain designs.

Modern technology is not spared and sewing curtain business. Hard lambrequins today can be decorated with photo printing, which is pre-selected and customized to the desired size.

Photos of curtains with lambrequins show that you can use such a decorative technique for window decoration not only in classic interiors, but also in modern hi-tech or techno trends.

Lambrequins for the bedroom

Designers believe that lambrequins are an indispensable element in any bedroom. Select this decor element should be at the stage of development of the design project.

It is possible to create curtains with lambrequins with your own hands, if you have some sewing skills. However, it is better to provide this task to professionals.

The design of curtains for the bedroom is selected based on the overall style. The classics are characterized by tough compositions, art deco and baroque prefer elegant lines and light silhouettes.

The bottom of the canvas is made using braid or fringe. Beads, ribbons and other elements are suitable for decoration. The design is also affected by the height of the ceilings.

If it does not exceed 2.5 - 3 meters, then the weighted structure will “steal” precious centimeters of height. If there is no possibility to sew curtains on an individual order, then in stores you can easily buy ready-made curtains with lambrequin.

Hard - such instances are created from a hard canvas "bando" or any other hard material. The design of curtains with hard type lambrequins looks strict and very luxurious. Due to the variety of models (swag, throwing, etc.), you can create unusual curtain compositions.

It is the bando tape that gives the lambrequin rigidity. It is a solid but plastic material made of artificial felt or similar non-woven texture. Thanks to the polymer adhesive applied over the entire surface, it reliably connects to the curtain fabric. Choosing a bando for curtains on their website, you can originally decorate your window.

After all, it is not necessary to buy ready-made lambrequins offered in stores - you can create unique models to your liking.

Photo design curtains with a lambrequin

Lambrequins are more decorative than practical. This element of the interior is designed to hide the connection of the curtains with the cornice and add elegance to the window space. Lambrequin can be hung in absolutely any room, however, it is especially difficult to choose such textiles for the kitchen. Here, all the elements must correspond to the mass of characteristics, and at the same time not clutter up the interior. How to choose a lambrequin for the kitchen - read on.

Lambrequins are designed to give the room beauty and comfort. They hide the junction of the cornice with curtains, which makes the window space tidier.

Such interior elements are commonly used in interiors with a classic or romantic design. In rooms made in high-tech style, such elements are used extremely rarely. If you decide to arrange the kitchen windows in a gentle pompous style, then the lambrequins for you will be excellent helpers.

What are the lambrequins:

1. Soft lambrequins are made from the same fabric that is used for sewing curtains. Such products flow in soft waves and make the window more elegant.
2. Hard lambrequins are made from facial and lining tissue. In another way, such products are called bando. Rigid lambrequins can also be made from a combination of cord and wire. Usually they have an openwork or floral ornament.
3. Combined lambrequins combine hard and soft product. They are especially beautiful and stylish, so they can find application in any interior.

These types of lambrequins can be used with different types of curtains. However, soft products look especially good with tulle, and hard ones with dense and straight canvases. Combined pelmet can decorate almost any textile.

When choosing curtains for a kitchen lambrequin, remember that Roman, Japanese, rolled curtains, and also blinds will not suit you.

What are the curtains in the kitchen with a lambrequin: photos and design ideas

Lambrequin should harmoniously fit into the interior. It should match the color of the other elements of the room, as well as the shade of the curtains.

Also, the lambrequin should be selected depending on the size of the window. Often the windows in the kitchen are small in size, so lambrequins with a large number of decorative elements do not fit there.

For small windows, you need to choose accessories that do not exceed 1/5 of the window frame. The fabric should not be very bright and not have large patterns and patterns.

A narrow rectangular lambrequin with a small amount of short fringe is perfect for a small kitchen. You can also purchase a small wavy accessory with tassels on one side.

Hard lambrequins are a great option for a small window. They do not take up much space and do not take up excess free space.

Combined asymmetric lambrequins, if selected correctly, can also decorate a window. It is desirable that the soft fringe is located on only one side of the pelmet.

You can find even more ideas for decorating curtains in rooms on the website:

Pelmet Height

A lot depends on the size of the lambrequin. The correct choice of the height of this element will determine how large the window will appear. Also, do not forget from the influence of the form and type of such a product on the layout of the room.

The height of the lambrequins directly depends on the size of the window and the height of the ceilings. For windows that have a height of less than a meter, it is impossible to use lambrequins with a large number of decorative elements, since such accessories reduce the already small space.

The windows in the kitchen are rarely large, so the lambrequins with which they are decorated should not occupy more than 1/5 of them. If you want to raise a low-lying window, you can hang the cornice 15-20 cm above the opening and use a 40-50 cm lambrequin to decorate it.

You can also choose the width of the lambrequin depending on the height of the ceilings. So in apartments with ceilings up to 3 meters, air products with a width of 30-40 centimeters will most likely look. For ceilings with a height of 3 meters, you can choose half-meter lambrequins. If you have ceilings below 2.6 meters, then do not choose accessories wider than 15 centimeters.

Which are there? How to make yourself? How to find out about new products? You can read all the answers to questions about lambrequins in one article:

How to sew a pelmet on one side with your own hands

Specialized stores sell the most interesting and fashionable new lambrequins. However, their price is often quite high. If you want to get an interesting and stylish lambrequin, which is the best suited for your kitchen, then do it yourself. Such work will not take you much time, but it will bring a lot of pleasure.

How to make a combined asymmetric pelmet:

1. Cut the stencil of the hard part of the lambrequin. It should have a width of 15 to 25 cm. Also you need to add on top the size of the girth of the cornice.
2. On the stencil, cut one element from quilted fabric, two mirrored from the front, two mirrored from the glue web and one of the glue non-woven.
3. Assemble the hard lambrequin in the following order: face element, adhesive gossamer, quilted fabric. Iron the resulting sandwich so that all the details stick together.
4. Sew a tulle element in a semicircle to one side of the lambrequin. Moreover, such a tulle should begin from the center and be larger on the one hand.
5. Gather the remaining elements in the following order: cobweb, interlining, and facial tissue.
6. Sew Velcro to the top of the resulting product. In this case, the soft halves should be on top, and the hard ones near the beginning of the carved ornament.

Such a product is completely simple to manufacture, but it looks very interesting. This type of pelmet is suitable for a small window in the kitchen. However, increasing the size of the weld, you will get a product suitable for decorating a large window frame.

You can also make a lambrequin exclusively on a rigid basis. To do this, you need to follow the steps described in paragraph 1-3, skip paragraph 4, and then follow the instructions in paragraphs 5 and 6.

Soft lambrequins are harder to make. Usually they use several types of fabric in different colors. Between themselves, you need to sew semicircles, frills and chillies, as well as organize the fastening of the element to the cornice.

Soft pelmets for the kitchen (video)

Lambrequins in the kitchen are not the most necessary element. However, they will give the room more elegance and luxury. Make a similar accessory with your own hands, and it will delight you for many years!

Design lambrequin for the kitchen (photo in the interior)

Window decoration plays an important role. This element of the house is a connecting part of the external and internal space of housing, a source of clean air and natural light.

But such functionality should be beautifully presented. Lambrequins will help to cope with this.

Lambrequins are often used to hide flaws of window frames, to divert attention from the fastening of curtains and tulles. This is a cleverly designed fabric panel that hangs over curtains.

The creation of this beautiful decor component can be either simple or complex depending on the type, model. Consider the popular variations of the implementation of lambrequins.

Variations

Before you start sewing lambrequins, you need to choose the base option, but it happens:

• Soft;
• Tight;
• Combined;
• Curly.

Soft - a mixture of both thin and thick fabric base. The surface can be flattened or folded, and the bottom of the panel can be straight.

Decorate with decorative flowers, satin bows, bugles, lace, make curly folds. Also draped with braid, ribbons or thrown over the ledge.

Hard lambrequin - it is performed on a strong adhesive material (proclamin, non-woven), plastic and wood are also suitable. The pomposity of this option is achieved by giving an unusual curly shape and edging, framing.

Combined - combines a thick, dense base and complemented by auxiliary elements with a thin, soft fabric.

Curly - the base with a massive, voluminous pattern and characteristic holes. Openwork lambrequins are made from such a basis, the design of which is carried out thanks to burning out by laser equipment. This view does not burden space.

Tailoring of decorative lambrequins. Sample Templates

The panels are diverse in their design. They can be decorated with different drapery material, swagas. Before sewing them, you need to familiarize yourself with the patterns and decorative elements of the product.

The swag element is a semicircle of thin fabric with characteristic folds. Semi-swag - the same swag, only with a hole in the upper half.

A decorative element of de jabot made of soft fabric that is located on the sides and includes a skew and creases.

Tie - this element is formed when stitching along the side seam of 2 frill.

Template Manufacturing Instruction

Be sure to leave room for the side and top edging (up to 3 cm), for the bottom about 12 cm.

Allowances are varied, depending on the details. For example, for such an element as swag on special paper draw a half circle and add creases, while calculating the cost of the material.

Production of panels from a rigid base

For a rigid panel, we need a wooden box, if its weight is very large, then we need to take a closed one to provide solid support. The components include the facade, mount and shelf. The facade is made of wood.

Note!

In addition, we need:

• Patterned with patterns up to 4 cm.
• A sheet of thin foam is cut to the size of a panel, but with an allowance of up to 5 cm.
• Lining material, also cut out according to the pattern with 2 cm passes for the hem along the entire panel.
• Fastening tools (glue, stapler).

Panel Instructions

The lining material with glue is attached to the facade and on the side of the wooden box. Cut off excess parts.

The fabric is attached to the base. If the fabric is with a large pattern, then it is shifted to the middle.

The lower edge is also attached so that nothing sticks out on the bends, you need to trim the excess.

The most popular and skillful lambrequins - openwork

Having studied no less complex hard lambrequins, we learn to make an original model - openwork lambrequins. More and more attention is paid to them, as they will give the room softness, weightlessness.

Note!

Guide to sewing openwork lambrequins:

• They come up and draw a pattern. Transferred to cardboard, cut out. Circle the finished pattern. Then cut out.
• The resulting pattern is attached to the thermobando, melting it.
• A complex pattern is attached to the glue web.
• We decorate with decorative elements: laces, ribbons, lace.

Soft lambrequins

The design is so simple that even a novice teapot will make it.

Production Instruction:

• Use soft tissue along the length of the cornice, while the shape of the fabric should be rectangular.
• Make small folds for beauty.
• If the bottom is long, then shorten. The side part is hemmed. Sew on loops from above.

Lambrequins for the living room

For the design of the halls, lambrequins of any shape are suitable, but do not forget to take into account the shape, size and style of the room.

If the room is large, then you should choose large, massive curtains.

If the space is small, then with the help of light tones, it is visually expanded.

Note!

Beads, ribbons, brushes are suitable for decoration. For this room, elements such as swag, ties are considered popular.

DIY lambrequins photo

Curtains on the windows not only make the room more comfortable and attractive, but also allow you to quickly and easily give uniqueness and originality to the home interior. In order to hide the defects of the window opening, the curtains and curtain rails use a decorative panel made of dense material and hung in front of the curtains - a lambrequin.

Options for lambrequins

• Hard (or bando). The material is mounted on a rigid frame.
• Soft . Draped with ribbons or simply thrown over the ledge.
• Combined . The combination of hard and soft models.

Patterns for Lambrequins

• Swagi - semicircle with beautiful folds;

• Allow for sure allowances: for the lateral edges and the upper 2 cm is enough, for the lower not less than 10 cm.
• Depending on the elements, the allowances will be different. For example, for a swag, draw a semicircle on paper and lay folds, simultaneously calculating how much material is needed to sew the panel. For frills, the height length is calculated empirically, and then the number of horizontal frills is calculated.

Properly constructed patterns will help to avoid mistakes when cutting and calculate the amount of textiles needed.

Rigid DIY panel model

When choosing the material for the box, they are guided by the rule: the heavier the panel, the stronger it should be.

• Textiles that are cut according to the pattern, not forgetting to leave allowances along the entire length - 5 cm.
• Padding, thin foam. It is cut to the size of the panel with an allowance of 3 cm over the entire length.
• Lining fabric cut according to the pattern with an allowance of 1.5 cm to the edge along the entire length.
• Stapler and paper clips, glue.

• The lining is glued to the facade and sides of the box. In the place of bends, it is incised. Then the knockout is bent back (left to the edge) and carefully glued.
• The fabric is laid on a prepared basis. If a canvas with a large pattern is selected, then it is shifted to the center. The allowance (it should be about 2 cm) is bent and fastened with a stapler to the top of the box, starting from the center and moving to the edges.
• Then they also act with the lower edge so that the canvas does not puff on the bends, it is carefully cut. The bottom edge can be decorated with edging, then it is sewn by hand.
• Lining is applied face up to the inside. The allowances are bent inward and secured with a stapler.

DIY openwork lambrequins

For sewing, thermobando is used as the basis.

• Choose a drawing and prepare a pattern. To do this, draw a pattern on paper and cut out. Then transfer it to the fabric and cut again.
• The finished pattern is glued to the thermobando, carefully spreading it.
• After that, the lining is attached to the inside. If the pattern is complex, then it is fixed on a special glue web.
• All edges are treated with a zigzag seam so that the material does not spill. And also the edges can be decorated with decorative cords, braid.

How to sew a soft model with your own hands?

• Take a rectangular shape along the length of the curtain.

If folds are planned, then the material should be taken 1.5 times longer.

• The bottom and sides are hemmed, on top sew loops for fastening. The product is ready.

Features of lambrequins for the hall

With various options for lambrequins for the living room can be found in the video:

The more elements, the more luxurious and interesting the design looks. However, in a small room, this design will look bulky and ridiculous. Therefore, read the article on how to choose the right curtains for the interior:.

Features lambrequins in the kitchen

For the north window, you should choose transparent lightweight fabrics, for the south - dense textiles.

• Rectangular narrow canvas, decorated with fringe or tassels. But, if the fabric is colorful, then you will have to refuse additional decoration.
• A tough model, decorated with a contrasting small applique.