Controller of measuring instruments and special tools. Instrument and special tool inspector

Description of works... Inspection and acceptance of simple devices, dies, cutting and measuring tools, processed within 12 - 14 grades, according to templates, calibers and limit brackets. Registration of acceptance documentation.

Must know: the purpose of the tools and devices used; rules and technical conditions for inspection and acceptance of control and measuring and cutting tools, stamps, fixtures; rules for drawing up acceptance documentation; system of tolerances and landings; qualities and roughness parameters.

§ 35. Controller of measuring devices and special tools of the 3rd category

Description of works... Checking and acceptance of working and measuring instruments, devices, fixtures and stamps of various complexity, processed within 11 - 12 grades.

Must know: device of tools and devices of various complexity; rules for the acceptance of special and universal measuring tools, cutting tools, devices, stamps, conductors and devices of varying complexity; tolerances and landings; types of threads and thread tolerances.

§ 36. Controller of measuring devices and special tools of the 4th category

Description of works... Checking, disassembling, adjusting, testing and checking weighing instruments of all systems and classes (except for standard, analytical, carriage and technical class 1), as well as complex measuring and cutting tools, dies and devices for post-final assembly and finishing in compliance with dimensions for 7-10 grades. Identification and elimination of defects. Checking measuring instruments and weights. Calculation of the error of weighing instruments during verification. Checking the correct use of weighing instruments and weights, depending on their purpose. Certification of weighing devices. Acceptance, disassembly, adjustment, testing and certification after inspection by special tools.

Must know: the device of pressure and vacuum weighing devices, electrical and radio measuring devices, micromanometers, etc., the classification of weights, instrumentation and tools, stamps and devices and the rules for using them; errors of mass measurement allowed by instruments and weights; weighing methods on various weighing instruments; system of tolerances and landings; grades and roughness parameters; rules for the acceptance of various measuring and cutting tools and methods for checking weighing, radio and electrical devices, pressure and vacuum devices and special tools; order of registration of certification documents and branding.

Work examples

1. Indicators, armholes, rings, gauges, pressure gauges and other special tools - check, adjustment and certification.

2. Weight measuring devices - verification, certification and branding.

3. Electrical and radio measuring devices and pressure and vacuum devices for 1 - 4 qualifications - checking, certification.

§ 37. Controller of measuring devices and special tools of the 5th category

Description of works... Checking, disassembling, adjusting, checking and testing exemplary, analytical, carriage and technical scales of the 1st class, complex measuring and cutting tools, instruments, stamps and devices after their final assembly and finishing in compliance with the dimensions according to 6 - 7 grades. Certification and branding after verification. Acceptance, inspection, adjustment and testing of special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0.

Must know: rules for checking, disassembling and adjusting weighing instruments, the procedure for certifying and branding them; purpose, device control devicesused to check electrical and radio measuring devices and pressure and vacuum devices, and the procedure for working with them; methods of checking all kinds of instrumentation and instruments.

Work examples

1. Technical, wagon, analytical and exemplary scales - checking and stamping.

2. Special tools of special accuracy and complexity - checking and certification.

3. Manovacuum meters of the MVP-2.5 type of the II category of the class 0.05 - checking and certification.

4. Devices for pressure and vacuum up to class 1.0 - acceptance, verification and certification.

5. Devices such as IL-13, UP4-1M, UIP-1, ANT - verification and certification.

6. Devices of type M-109, MOR-60, LM-1 - verification and certification.

7. Chronometers - check, adjustment and certification.

8. Cathode-ray oscilloscopes of the ENO-1 type and the device of the VK7-4 type - verification and certification.

§ 38. Controller of measuring devices and special tools of the 6th category

Description of works... Inspection of complex optical instruments, coordinate machines, assembly and test stands, spatial templates, complex conductors for drilling a hole in three or four planes at different angles after their final assembly and finishing in compliance with the dimensions of grade 5. Checking accurate and complex patterns with the location of the planes in various projections of 1 - 4 quality. Setting up instruments for checking the involute, spiral and pitch and performing calculations related to their verification.

Must know: the design of complex optical devices, coordinate machines, assembly and test stands, etc .; methods of measuring spatial patterns, design and technology of their manufacture; methods of calculating dimensions given in space; the calculation methodology required to check the involute, spiral and pitch; rules for registration of passports, acceptance certificates.

Secondary vocational education is required.

Work examples

1. Special complex tools - checking and certification.

2. Universal microscopes, comparators, interferometers -check and certification.

3. Multi-seat molds of complex configuration - production control and adjustment.

4. Optical measuring devices - verification and certification.

5. Body stamps - production control and adjustment.

\Typical job description of the 4th grade meter controller

Job description of the 4th grade measuring instrument controller

Position: Controller of measuring devices of the 4th category
Subdivision: _________________________

1. General Provisions:

Subordination:
• The 4th grade instrumentation controller is directly subordinate to ........................
• The 4th grade instrumentation controller follows the instructions ......................................... ...........

(the instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).

Substitution:

• The 4th grade measuring instrument controller replaces .......................................... .......................................
• The controller of measuring devices of the 4th category is replaced by .......................................... .....................................

Reception and dismissal from office:
The controller of measuring devices is appointed and dismissed by the head of the department in agreement with the head of the department.

Must know:

• device of pressure and vacuum weighing devices, electrical and radio measuring devices, micromanometers, etc., classification of weights, control and measuring devices and tools, stamps and devices and rules for their use
• errors of mass measurement allowed by instruments and weights
• weighing methods on various weighing instruments
• system of tolerances and landings
• qualities and roughness parameters
• rules for the acceptance of various measuring and cutting tools and methods for checking weighing, radio and electrical devices, pressure and vacuum devices and special tools
• order of registration of certification documents and branding.

• Checking, disassembling, adjusting, testing and checking weighing instruments of all systems and classes (except for exemplary, analytical, carriage and technical class 1), as well as complex measuring and cutting tools, dies and fixtures after final assembly and finishing in compliance with the dimensions of 7- 10 qualifications.
• Identification and elimination of defects.
• Checking measuring instruments and weights.
• Calculation of the error of weighing instruments when checking.
• Checking the correctness of the use of weighing instruments and weights, depending on their purpose.
• Certification of weighing devices.
• Acceptance, disassembly, adjustment, testing and certification after checking the special tool.

4. Rights

• The controller of measuring devices has the right to give instructions to subordinate employees, assignments on a range of issues included in his functional duties.
• The controller of measuring instruments has the right to control the execution of production tasks, the timely execution of individual orders by his subordinate employees.
• The meter controller has the right to request and receive necessary materials and documents related to the issues of their activities and the activities of subordinate employees.
• The controller of measuring devices has the right to interact with other services of the enterprise on production and other issues that are part of his functional responsibilities.
• The controller of measuring devices has the right to get acquainted with the draft decisions of the enterprise management regarding the activities of the Division.
• The controller of measuring devices has the right to propose to the manager for consideration proposals for improving the work related to the duties provided for in this Job Description.
• The controller of measuring devices has the right to submit to the head for consideration proposals on the encouragement of distinguished employees, the imposition of penalties on violators of production and labor discipline.
• The controller of measuring instruments has the right to report to the head of all identified violations and shortcomings in connection with the work performed.

• The instrumentation controller is responsible for improper performance or non-performance of his job responsibilitiesprovided for in this job description - within the limits determined by the labor legislation of the Russian Federation.
• The meter inspector is liable for violations of the rules and regulations governing the business.
• Upon transfer to another job or dismissal from office, the Controller of Measuring Instruments is responsible for the proper and timely delivery of cases to the person taking the current position, and in the absence of such, to the person replacing him or directly to his manager.
• The controller of measuring instruments is responsible for offenses committed in the course of carrying out his activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
• The controller of measuring devices is responsible for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
• The controller of measuring instruments is responsible for compliance with the applicable instructions, orders and orders for the preservation of commercial secrets and confidential information.
• The meter controller is responsible for compliance with internal regulations, safety and fire safety regulations.

Head of structural

Job controller of measuring instruments and special tools vacancies controller of measuring instruments and special tools in Russia. Vacancy controller of measuring instruments and special tools from a direct employer in Russia job advertisements controller of measuring instruments and special tools Russia, vacancies of recruitment agencies in Russia, looking for a job controller of measuring instruments and special tools through recruitment agencies and from direct employers, vacancies controller of measuring devices and special tools with and without work experience. Site of advertisements for part-time work and work Avito Russia job vacancies controller of measuring instruments and special tools from direct employers.

Work in Russia - controller of measuring instruments and special tools

Site work avito Russia work fresh vacancies controller of measuring instruments and special tools. On our website you can find a high-paying job as a controller of measuring instruments and special tools. Look for a job as a controller of measuring instruments and special tools in Russia, browse vacancies on our job site - an aggregator of vacancies in Russia.

Avito jobs Russia

Work as a controller of measuring instruments and a special tool on a website in Russia, vacancies as a controller of measuring instruments and a special tool from direct employers in Russia. Jobs in Russia without work experience and highly paid with work experience. Jobs controller of measuring instruments and special tools for women.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force upon approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. This document is checked periodically at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Controller of measuring devices and special tools of the 5th category" belongs to the category "Workers".

1.2. Qualification requirements - incomplete higher education (junior specialist) without requirements for work experience or vocational education, advanced training and work experience in the profession controller of measuring instruments and special tools of the 4th category - at least 1 year.

1.3. Knows and applies in activities:
- rules for checking, disassembling and regulating weighing instruments, the procedure for their certification and branding;
- purpose, structure of control devices, which are used to check electrical and radio measuring pressure and discharge devices and the procedure for working with them;
- methods of testing any complex instrumentation and instruments.

1.4. The controller of measuring instruments and special tools of the 5th category is appointed and dismissed by order of the organization (enterprise / institution).

1.5. The 5th category meter and special tool controller reports directly to _ _ _ _ _ _ _ _ _ _.

1.6. The controller of measuring devices and special tools of the 5th category manages the work of _ _ _ _ _ _ _ _ _ _.

1.7. During the absence, the controller of measuring instruments and special tools of the 5th category is replaced by a person appointed in the prescribed manner, who acquires the relevant rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and duties

2.1. Accepts, disassembles, adjusts, checks and tests exemplary, analytical, laboratory and technical scales of the 1st class, especially complex measuring and cutting tools, fixtures, dies and devices after their final assembly and processing in compliance with the dimensions for the 6-7th grade (1 - 2 classes of accuracy).

2.2. Certifies and brands them after verification.

2.3. Accepts, checks, regulates and tests special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0.

2.4. Knows, understands and applies the current regulations concerning his activities.

2.5. Knows and fulfills the requirements of regulatory enactments on labor protection and the environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The controller of measuring devices and special tools of the 5th category has the right to take action to prevent and eliminate cases of any violations or inconsistencies.

3.2. The controller of measuring devices and special tools of the 5th category has the right to receive all social guarantees provided by law.

3.3. The controller of measuring instruments and special tools of the 5th category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. The controller of measuring devices and special tools of the 5th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The controller of measuring instruments and special tools of the 5th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The controller of measuring devices and special tools of the 5th category has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.

3.7. The controller of measuring devices and special tools of the 5th category has the right to improve their professional qualifications.

3.8. The controller of measuring devices and special tools of the 5th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The controller of measuring instruments and special tools of the 5th category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The controller of measuring devices and special tools of the 5th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. The controller of measuring devices and special tools of the 5th category is responsible for non-observance of the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The controller of measuring devices and special tools of the 5th category is responsible for the disclosure of information about the organization (enterprise / institution) related to trade secrets.

4.4. The controller of measuring devices and special tools of the 5th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and legal orders of the management.

4.5. The controller of measuring devices and special tools of the 5th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The controller of measuring devices and special tools of the 5th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The controller of measuring devices and special tools of the 5th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Technical, wagon, analytical and exemplary scales - checking and branding.

5.2. Cathode-ray oscilloscopes ENO-1 and device of type VK7-4 - verification and certification.

5.3. Special tools of special accuracy and complexity - checking and certification.

5.4. Manovacuum meters of type MVP-2.5 of the II category of class 0.05 - checking and certification.

5.5. Pressure and vacuum devices up to class 1.0 - acceptance, verification and certification.

5.6. Devices such as IL-13, UP4-1M, UIP-1, ANT - verification and certification.

5.7. Devices of the type M-109, MOR-60, LM-1 - checking and certification.

5.8. Chronometers - check, adjustment and certification.