Non-woven textured wallpaper. Wallpaper for painting: types and decor (24 photos). How not to "get lost" in a variety of colors

At the mere mention of repairs, many will shudder. For everyone, he is associated with solid material costs, dirt and spoiled nerves. However, there are ways to minimize all these inconveniences.

When it comes to walls, some people prefer to paint them in an even solid color rather than pasting them with variegated embossed wallpaper. However, the preparatory work in this case is very time consuming, since the surface to be painted must be perfectly aligned. Smooth paintable wallpaper comes to the rescue. They will help hide various flaws in the surface of the walls and, thereby, eliminate the need to use a finishing putty.

There are the following types of smooth wallpaper:

• non-woven;
• fiberglass (fiberglass);
• paper;
• liquid.

Smooth paintable non-woven wallpaper

Smooth non-woven wallpaper intended for dyeing is a flat canvas, devoid of a layer of foamed vinyl, characteristic of embossed wallpaper of the same type. There are several types of cellulose fiber, which is the basis of these wallpapers:

• modified and unmodified;
• glued and not glued.

Such smooth non-woven wallpaper intended for painting has a number of advantages:

• do not harm human health;
• mask the unevenness of the wall surface (replace the finishing putty);
• easily and evenly painted with water-based paints;
• do not shrink after drying.

Different types of smooth non-woven wallpaper vary in density. The most dense ones allow you to mask large irregularities in the walls. With minor defects in the surface of the walls, you can choose a thinner canvas. This type of wall alignment is recommended for use in new buildings, since such non-woven wallpaper does not shrink and inhibits the formation and propagation of cracks.

Smooth paintable wallpaper based on fiberglass (fiberglass)

Fiberglass is a non-woven fabric with a random arrangement of threads. It is made on the basis of fiberglass and organic resins and has various densities and strengths. With an increase in strength, its cost increases accordingly. Fiberglass can also be used instead of a finishing putty. It is used both on plastered surfaces and on drywall, as well as for strengthening or reinforcing the ceiling and walls.

Also, the advantages of fiberglass include:

• durability;
• incombustibility;
• heat resistance;
• resistance to acids;
• non-hygroscopicity;
• lack of allergens;
• vapor permeability;
• resistance to the formation of fungi and mold;
• inability to accumulate dust.

The disadvantage of fiberglass wallpaper can be considered small glass fibers formed when cutting the canvas. However, personal protective equipment will help to protect against them during repair work: respirator, goggles, gloves.

Paper smooth paintable wallpaper

Paper wallpapers are also suitable for coloring, of course not all, but there are certain types. Their advantage is environmental friendliness, that is, the absence of any harm to human health. However, they have much more disadvantages: they are highly hygroscopic, and it is very difficult to glue some types of paper wallpaper "joint to joint".

Liquid wallpaper - ideal for painting

This type of wall covering as liquid wallpaper does not fit into the framework of the usual concept of wallpaper. They are produced in the form of a dry powder, to which you must add a certain amount of water, mix thoroughly and leave for a while. They are painted before being applied to the wall: color is added at the stage of preparing the mixture. The principle of applying them to the wall is similar to plastering. But liquid wallpaper consists of fibers of plant and animal origin (for example, cotton, cellulose). After drying, the surface texture resembles smooth wallpaper.

This coating has the following advantages:

• ease of application to the wall;
• no need for careful preparation of the walls (masks minor surface defects);
• good sound and heat insulation properties;
• vapor permeability (does not create a greenhouse effect in the room);
• the possibility of restoration of small chips, scratches;
• the possibility of repeated use.
• One of the few disadvantages of liquid wallpaper is the lack of moisture resistance without special treatment..

The use of smooth paintable wallpaper will significantly save time and money, and will also help to avoid unnecessary dirt associated with repairs.

Smooth paintable wallpaper - functional and profitable solution. It is enough to choose them once and easily change the design of the room many times, using different types and shades of paints.

Smooth paintable wallpaper - modern, environmentally friendly finishing material

Modern manufacturers offer a wide range of materials for indoor wall decoration. Smooth paintable wallpaper is always in demand. They are actively used for decorative cladding of premises by professional interior designers. These coatings are good in that they allow you to quickly and relatively cheaply not only change the color scheme of the room, but also transform the overall interior.

Smooth paintable wallpaper is good because its gluing provides an absolutely flat surface for painting. You can repaint smooth canvases several times. The most common types of smooth paintable wallpaper are fiberglass and non-woven paint. Both the one and the other material have proven to be excellent as a finishing coat of walls prepared for painting.

Fiberglass and its use for preparing walls for painting

Fiberglass, as a smooth wallpaper for painting, appeared on the domestic market of finishing materials relatively recently, but almost immediately it began to enjoy popularity, both among individuals and contracting teams that are professionally engaged in interior renovation of premises. The indisputable advantages of this wall covering include:

• Long service life ranging from 10 to 50 years;
• Versatility - fiberglass is suitable for finishing walls for painting both in residential and non-residential premises;
• Good vapor permeability, due to which the walls can "breathe", which completely eliminates the risk of mold and mildew;
• High fire resistance - fiberglass not only does not burn, but also stops the spread of flame;
• Resistance to temperature extremes and high humidity in the room.

Fiberglass can be found in the collections of famous manufacturers of decorative wall coverings, for example - Vitrulan, Brattendorf, Wellton and others. This modern, environmentally friendly material is a smooth fabric consisting of fiberglass and an adhesive. Fiberglass for painting usually has a density of at least 130 g / m2. Fiberglass with a lower density can be used for painting, but it should be borne in mind that the painted surface will not be absolutely smooth.

When gluing fiberglass, the canvases are glued vertically from floor to floor ceiling using a special glue. After the glue dries, the fiberglass is extremely difficult to tear off the wall, so it is used not only for the final leveling of surfaces for painting, but also for additional reinforcement.

Painting interlining and its use for preparing walls for painting

Painting interlining can be called a traditional alternative to fiberglass. It also belongs to the category of smooth paintable wallpaper. This material, which is a non-woven fabric that looks like a Whatman sheet, consisting of polyester textile fibers and long-fiber cellulose, interconnected with an acrylic polymer, is widely used for:

• Wall alignment;
• Preparing them for painting without using a finishing filler;
• Prevention of cracking;
• "Masking" existing wall defects;

Painting interlining is excellent for finishing paintable walls in offices and public spaces. This material has good wear resistance, it is not afraid of temperature extremes and high humidity. The average service life of a painting non-woven fabric is at least 10 years. It withstands many stains, is odorless and does not emit harmful substances into the atmosphere. And, most importantly, it is easy to work with paint interlining, when glued it does not stretch, does not tear and shrinks when it dries.

Everyone can figure out the nuances of pasting walls with smooth wallpaper for painting, the main thing is to show the desire and ability to do something with their own hands.

Exclusive non-woven wallpaper for painting Lanita has a relief structure, in their manufacture professionals use the most modern technologies plus high-quality raw materials.

Fiselin wallpaper is a good solution for interior design:

• With their help, you can successfully decorate both walls and ceilings.(see How to glue wallpaper on the ceiling yourself). This type of finishing work is good because the wallpaper can be repainted over time.
• Non-woven base for strength and durability, the walls after gluing look stylish and beautiful.
• This type of decor has quite rightly won prestige in the construction market.
• People are increasingly buying and decorating their homes with non-woven wallpaper... This is due to a set of positive characteristics of the product. They cannot be called ideal either.

Before buying, you should still weigh the pros and cons

Expendable materials

The set is required as standard, as for pasting ordinary paper wallpaper.

You need to stock up:

• Wallpaper.
• Adhesive composition.
• Tools for applying glue to the surface of walls, ceilings.
• Wallpaper tools: knife, wallpaper staple.
• A table, a stepladder or special devices that you can climb on and reach any corner of the room to be pasted.

Non-woven properties to consider

This material has a transparent structure:

• If you chose not a thin product or applied a thin layer of paint on the wall, the wallpaper will shine through all the imperfections of the surfaces of the walls of the room.
• Having glued the tapestries to the walls, where only the lines of joining building materials have been treated with putty, you will be disappointed with the result. These joints will show through in the future.
• Before starting work, check if the wallpaper shows through the imperfections of the wall.

If yes, then there are several options: cover the entire wall with putty, choose a thicker wallpaper, or apply several layers of paint to the wallpaper.

Wallpaper gluing for painting

An ordinary person who is not an expert in construction can cope with this task with his own hands.

The instruction is quite simple:

• The first step is to prepare the walls, the ceiling of the room for pasting. To do this, remove the old wall covering. Wallpaper will look better on walls lined with putty.
• Collect all the necessary supplies in the room where the renovation is planned.
• Mark, then cut the whole wallpaper into sheets of the required length.
• Cover walls and ceilings generously with special wallpaper adhesive. It has a thicker structure than conventional wallpaper glue. No glue is applied to the paper.
• Glue the measured canvases on the wall, while leveling the surface with a plastic wallpaper spatula, removing all bubbles.
• Check the quality of pasting, cut off excess paper.
• Repeat the procedure around the entire perimeter of the room.

Note. Non-woven wallpaper smooth for painting should be glued joint to joint. But, not all walls can have a flat, identical surface. In this case, the strips are overlapped.

• After the wallpaper has laid down on the wall as needed, you should cut off the excess material so that the result is a smooth joint not overlapping.

There should be no drafts in the room, all windows should be closed while the wallpaper dries.

How to paint non-woven wallpaper

Several types of paints are used for coloring:

• It can be water-based paint, acrylic or latex paint.
• Water-based paint is the cheapest, but the quality leaves much to be desired.
• Colors are dull, afraid of water. Latex paint is considered the safest.
• Its composition allows the walls to dry in five hours. It is well applied to the surface of the wallpaper, after drying it does not lose its brightness, does not enlighten, which means that after painting all the imperfections of the wall are not visible.
• Acrylic paint is more suitable for painting rooms with high humidity.
• It creates a protective film on the surface of the wallpaper, so such surfaces do not allow water to pass through, they can be washed.

Note. You can repaint non-woven wallpaper up to six times. You can apply paint to the wallpaper with a roller

Paint the coating only after the glue has completely dried:

• To apply the helmet to the wallpaper, the roller is dipped into a tray with paint, squeezed a little and paint is applied to the surface of the walls.
• The best way to paint over the embossed wallpaper will help a roller with a long nap or foam rubber.
• Choose the system by which to apply paint to the wallpaper yourself.
• Bottom up or top down is not critical.
• It is better to paint over wallpaper in corners or at the joints between the ceiling and walls with a brush.
• If a plinth is installed on the walls, even before painting, it must be sealed with construction tape.
• This will be more accurate.
• It will not work perfectly the first time to paint over the entire surface. Poorly painted areas need to be processed again until you get the desired result and beautiful walls.
• Bright, colorful and stylish photos of non-woven wallpaper will certainly attract attention.
• Naturally, there is a desire to use them in the repair. It is not difficult to work with non-woven wallpaper.

Having spent only on the purchase of consumables, you can do all the work yourself. For more detailed information, we recommend watching the video in this article.

One of the most common among consumers is smooth wallpaper: a pleasant to the touch and smooth surface of such coatings allows you to perfectly convey all the subtleties of the author's design. And when choosing smooth self-paint finishes, you get unlimited creativity.

Features and Benefits

Is wallpaper with a smooth surface really that convenient in the process of gluing and decorating? The main the features of such wall coverings are explained by the simple structure of the canvas: Most wallpapers of this type are single-layer, so neither gluing nor painting is particularly difficult.

A high-quality one-layer smooth coating made of durable material creates additional protection for the walls in the room, promotes visual leveling of the surface, and closes visible defects.

Other benefits of using smooth wall coverings include:

• a simpler process for painting the canvas;
• ease of gluing to any surface (it's no secret that thin single-layer coatings without relief are easier to grasp);
• the possibility of faster and more convenient joining of individual fragments of the drawing;
• no inconsistencies in the thickness of materials of the same type;
• smooth surface is convenient for using additional accessories on the walls;
• wallpapers with a smooth surface have a more varied design and can include a number of decorative effects (glossy overflows, matte fragments, glitters, etc.).

Another undoubted advantage of this type of wallpaper is its ease of use in interiors of different styles and sizes. If large relief elements of the canvas contribute to a visual reduction in space, then smooth coatings can cause such an effect only due to certain shades.

It will be much easier to choose smooth wallpaper for the walls that match the style of the room than the relief counterparts.

Varieties

The structure of a smooth canvas is chosen depending on external factors that affect the quality and decorative properties of such wallpapers.

You can choose from the following wall coverings:

• and other wallpapers.

Paper smooth wallpaper is the most common wall covering option. The characteristic features of these materials include lightness, ease of gluing and, environmental safety and low cost.

Advice: almost all paper wallpapers have the same thickness, therefore they provide an opportunity to create effective combinations on the walls of their fragments of different shades and styles.

But with constant exposure to moisture, such wallpapers will quickly deteriorate, and during the cleaning process they may lose not only color, but also shape. Suitable for rooms with favorable conditions and are characterized by the shortest durability compared to other types of wallpaper with a smooth surface.

Smooth vinyl wallpaper is ideal for those who prefer to buy materials, focusing not only on appearance, but also on quality properties. Most wallpapers of this type executed in the form of exquisite imitations of textile fabrics, they are characterized by an abundance of shades and subjects of images.

The features of vinyl wallpaper include a fairly high strength, resistance to moisture and mechanical stress, using detergents and chemicals.

Smooth non-woven wallpaper can also have a bright pattern, but most often produced in the form of paintingssuggesting periodic staining.

The main difference between smooth non-woven wallpaper and embossed counterparts is the absence of a top layer that forms a texture. Therefore, such wallpapers are considered less durable, but they are distinguished by their environmental friendliness, moisture resistance, and lightness.

Smooth paintable wallpaper will withstand much more repainting than embossed coatings. Therefore, you can change the decor in the room more often.

Besides, smooth-surfaced wallpaper is easier to multi-color, and the drawings created using stencils will not look like unnecessary details on such walls.

The nuances of the decor of different rooms

Smooth kitchen coatings

Choosing a smooth wallpaper for the kitchen is not an easy task. Moisture, grease, steam will get on the walls, the surface of the walls may be subject to mechanical damage, therefore, such coatings must be durable and reliable.

When decorating a kitchen with smooth wallpaper, it is better to give preference to coverings.

When choosing wallpaper with a smooth surface, design is of great importance. In the kitchen, this aspect is important because of its influence on your mood and appetite.

It is better if the color scheme of the walls is light and warm.: regardless of the style, they will be successful in such an interior. Cool shades are suitable for spacious rooms.

Wallpaper for the bedroom and living room

Wallpaper in these interiors should be safe, environmentally friendly and pleasing to the eye. If you do not count on a long-lasting effect, choose paper wallpaper. Non-woven, fiberglass and vinyl coverings are suitable for areas with an increased risk of negative impact (for example, in a balcony area with constant access to light or in a play area where a child can damage the surface of the canvas).

The optimal shades for the hall are pink and other colors related to the natural palette.

For such premises, paintable wallpaper is suitable: even without additional patterns, they will become an effective addition to the design, as they will set the background for the entire interior. In a children's room, such coatings are useful in that they allow you to paint any image on the wall.

Choosing smooth materials for corridor walls

The hallway and corridor are the darkest areas in the house: there is neither light nor space, therefore embossed coatings are not considered a good option for their design.

You can choose any type of smooth wallpaper for decoration., but experts recommend staying on non-woven coatings, as they are considered the most reliable from a practical point of view: with constant friction and contact with outerwear, they will not lose their appearance.

The color of the walls in such an interior should be light, otherwise you risk creating the wrong impression about the whole house: let your guests be charged with positive and warmth thanks to the natural shades on the walls of this room.

Compositions. They will become a fashionable accent in modern design trends.

Smooth wall coverings should not be overlooked either. By choosing the right shades and patterns for decoration, you can emphasize the harmony and comfort of your home environment. Smooth wallpaper is a great option for those who want to create original and durable designs on the walls of every room in the house.