Finishing the garage, how to properly decorate the garage inside, options. Do-it-yourself garage interior decoration (36 photos): concrete floors, plastering, tiles, plastic panels and clapboard How to decorate the walls in the workshop

Garage lining is very important. The cladding is done inside and out. Of course, it performs several functions at once. The emphasis is on the following:

Today we will dwell on the exterior wall decoration in more detail. We will find out how to sheathe the garage outside, what materials are the most practical, economical. Consider the process of wall cladding with siding, find out the features of the technology. All useful information, algorithms and advice will help you then independently carry out all the work and achieve the best result. Then the wall cladding of the garage will serve you for many years and will successfully perform all its functions.

A fairly wide range of building materials is now used for cladding garage walls from the outside. We will focus on the main ones, pay attention to their key characteristics. The greatest demand is for siding and plaster, as well as lining and artificial stone, a blockhouse. Of course, some garage owners choose brick cladding.

Plaster

The "wet facade" technology is widespread. It's not just plastering the walls. The process will be a little more complicated.

First of all, the walls are treated with a layer of adhesive.
Then the expanded polystyrene plates are fixed on the glue.
Then everything is carefully covered with glue again.
In the next step, a special reinforcing mesh is fixed on the walls.
Already at the final stage, complete plastering is carried out.

From a technological point of view, the work is somewhat difficult, but with certain skills, it is easy to cope with. It is important to follow the sequence, do everything carefully, monitor the quality of the solutions. Then this finish will last a relatively long time. The basic advantages of the method are the reliability and strength of the walls, the effect of thermal insulation, and efficiency. True, in order to ensure a decent quality of such a coating, it will be necessary to additionally level the walls before carrying out work.

Siding

Siding is very popular. You can choose from metal or cement, wood or vinyl siding. Everything will depend on the personal preferences of the car enthusiast and the budget. The use of vinyl siding is widespread, which attracts with the optimal combination of acceptable cost and good technical characteristics. Let's note its advantages.

Vinyl siding is easy to install.
It perfectly protects the walls of the garage from moisture.
The material attracts with a high level of fire safety.
Experts note the increased resistance of vinyl siding to sudden temperature changes.
The material is durable, reliable and safe.
The panels are lightweight, which greatly simplifies the process of transportation and installation, reduces the load on the supporting structures of the garage.

Some garage owners opt for wood siding. It certainly requires additional processing with fire retardants, and is also quite expensive.

Cement siding is not very practical due to a significant drawback - a lot of weight. Metal siding is popular. It is very durable, it is not afraid of mold and mildew, temperature jumps. But you will have to take extra care of protecting the material from corrosion. It is necessary to use special self-tapping screws with rubberized heads during the installation process.

Block house

The original option for facing the walls of the garage outside is a blockhouse. It is most suitable for those who have a nearby house also trimmed with this material. Then the residential building and the garage will make up an excellent architectural ensemble. The blockhouse looks elegant, visually imitates a log wall. The material is divided into classes. For a garage, it is worth choosing a class A coating that is most suitable in terms of quality and price.

Wooden lining

An interesting solution is to use wooden clapboard for covering the walls of the garage. It is made from coniferous, deciduous trees. Such material is distinguished by its environmental friendliness, safety, but it requires mandatory additional processing. Here it is necessary to use flame retardants to increase the level of fire safety. Of course, the ease of installation of the lining is also attractive: the elements of the material are immediately equipped with a special locking fastener according to the "groove-comb" principle. This is very convenient in the process of fixing the wall covering layer.

The lining is produced in several classes. The highest quality ones are distinguished by the maximum cost. You can opt for the best option: class A lining has quite decent characteristics and an average cost. It is just perfect for covering the garage.

Natural and artificial stone

Some garages choose stone for wall cladding. Such material allows you to create a memorable design, turn a building into a work of art. Of course, there are some nuances. It is not so easy to handle the stone during the installation process. It is advisable to have at least minimal skills of a builder, since the process is laborious: it is important to apply the adhesive composition correctly, do everything as carefully and competently as possible so that the coating is securely fixed.

You also need to choose whether to use artificial or natural stone. Natural material has the best performance characteristics, but it weighs much more and is expensive. This will require a significant budget, while the walls will also have a serious load.

We sheathe the garage with siding

Siding garage cladding is the best solution. Let's take a closer look at the process of wall cladding, find out how to make the coating as reliable, durable and aesthetic as possible.

Materials

You will definitely need the siding itself. You can choose vinyl. Also, immediately think about how you will install the panels. Since the garage space is usually not heated, the best solution in this case is wall cladding from the outside along the ventilated facade system. Then you will simultaneously carry out thermal insulation. The thermal insulation material is simply laid into the crate cells during the installation of the ventilated facade with siding. The inner area will remain free of a layer of insulation.

Panel types

It is important to decide on the type of siding panels. It depends on him what configuration of the ventilated facade you will have, what kind of structural elements you need.

Horizontal siding is mounted horizontally. It perfectly imitates the profile of the board, wood texture. The details of the lathing during the installation of such siding are placed vertically, and the cladding is made from the bottom up. A starting bar is mounted along the lower perimeter, and work is already started from it.
Less commonly, vertical siding is used. In texture and appearance, it is similar to the horizontal one, but its configuration is different. Lathing belts for vertical material are made horizontal. The installation is also different. It is conducted from the corners of the building, without laying a starting bar. Work begins with a special profile that is mounted in the corners. It is in its groove that the first, last element is inserted.
For the above-ground part of the foundation, a plinth siding is also available, adapted to standard heights. It is convenient to work with him, they are successfully lined with the basement of the garage.

Siding can be metal and vinyl, composite and plastic, cement. A wide range of colors are presented. The cost largely depends on the raw materials from which the siding was made. The installation of the elements has no fundamental differences, but there may be a slight difference in the features of the lock connection. Choose the one that best suits your preferences and budget, but don't forget about the technical specifications. The most practical is vinyl siding.

Cladding frame

We are considering the option of wall cladding with siding as a ventilated facade, when the insulation of the structure is immediately provided. Let's consider the features of the frame in our case.

You can make a ventilated facade on a wooden or metal frame. If you do insulation, then you should give preference to the combined option. It is he who is advised by experts and experienced garage workers. Then the lower lathing is made of bars with parameters 30 by 30 mm, but now the upper lathing must be made from a profile. Think about which option suits you best, and pay attention to the cladding scheme with an insulating layer.

Let's find out why install two battens. The fact is that decorative and thermal insulation materials will differ in size. At the same time, during the installation process, special convenience is created due to the observance of the pitch of the frame belts. It is also important to guarantee a certain thickness of the battens so that there is a gap between the cladding and the insulation. It is this distance between the layers, which should be about 3-4 cm, and is necessary to create a ventilated facade.

Sometimes garages do without a bottom crate. They fix the insulation by attaching it to the walls of the garage with dowels, an adhesive mixture. In this case, an offset from the base is still needed. Then it will have to be done thanks to direct suspensions. Remember that in this case you will need to glue all the joints between the insulation plates with special insulating tape.

The best solution is to install a crate under the thermal insulation layer. A step is made between the profile and the bars, which should be 1 cm less than the width of the slab itself. Then the insulating material will fit well into the cell, it will be much easier to fix it with glue. You don't even need to hold the stove while the glue dries.

Expanded polystyrene, mineral wool are well suited as a heater. Be sure to pay attention to fire safety: you need non-combustible materials.

The best option for lathing is a metal profile.

You will need a set of tools: a screwdriver and a hammer drill, a marking cord and a building level, a screwdriver with a hammer, and an electric jigsaw or metal scissors.

Cladding installation

Consider the algorithm for installing the outside of the garage wall cladding with siding.

To accurately navigate in all the intricacies, it is worth watching the video.

Video: take a closer look at siding

Now you can find out even more useful information about siding. It is this material that enjoys increased popularity as the main exterior cladding for garage walls.

This video tells in detail about siding, its main technical characteristics, advantages.

Have you decided to use siding for the wall cladding of your garage? It's a good choice. But you will need to understand in more detail how best to install a metal profile under siding. The following video will help you.

Watch the video carefully. It clearly provides instructions for installing a metal profile for siding. By following the recommendations, you will achieve the reliability, durability of the skin.

Many motorists are thinking about the appearance of a garage for storing cars. Some people like an ordinary metal box, while others want to make the room more comfortable and comfortable. It is recommended that you familiarize yourself with how the inside garage is finished in order to equip everything yourself.

Before you start finishing, you will have to familiarize yourself with what it includes. Finishing work, based on the location, is divided into two main categories.

External

Many people are interested in how you can sheathe the walls of a car garage from the outside. They approach the exterior decoration more seriously than the interior, since the safety of the structure depends on the quality of the work performed. If you use low-quality material for cladding, it will quickly deteriorate under the influence of temperature extremes, sunlight and precipitation.

Before performing the exterior decoration of garage facades, you need to familiarize yourself with the nuances of choosing a suitable material. Experts advise buying products with the following properties:

high degree of resistance to high air humidity;
low surface abrasion;
resistance to mechanical stress;
reliable protection against sudden changes in temperature and exposure to sunlight;
resistance to low temperature indicators.

Experienced builders are advised to purchase materials that are used only for outdoor work. Often for this, they purchase wooden siding, lining or special moisture-resistant plaster.

Internal

A car garage should be not only safe, but also comfortable so that a person can stay in it longer. It is for this that internal finishing works are carried out, which will make the room for long-term car storage more attractive.

The interior decoration must be done using the most suitable materials. Therefore, when choosing them, they pay attention to the fact that they are:

Resistant to chemical and mechanical influences. Such building materials are more durable, since they are difficult to spoil.
Non-flammable. Fire-resistant building materials heat up slightly, thereby reducing the likelihood of fires.
Resistant to the spread of bacteria, fungi and other microorganisms dangerous to humans. Many motorists spend a lot of time in the garage, and therefore there should be nothing in it that is harmful to health.
Unpretentious in care. For walls and ceilings, materials are selected that are slightly dirty.

How to decorate the walls and ceiling inside

There are various options for materials that are used for DIY interior wall decoration. Therefore, they choose in advance how to paint the walls, and also determine what is suitable for their facing.

Plaster

Many people prefer to finish the walls with plaster, as it can stand for several decades. Its advantages include heat resistance and low cost.

Before applying the plaster mixture on the surface, check the temperature inside the garage. It should not be lower than five degrees, since at low temperature indicators, the plaster is worse attached to the wall.

PVC panels

Wall panels made of plastic are considered universal, as they are used for external and internal finishing work. The advantages of PVC products include a high level of protection against mechanical damage, as well as ease of maintenance and installation. Such panels can be installed in two ways: on a wooden frame or directly to the wall.

Tile

In order to have an attractive interior inside the garage, its walls are tiled. When arranging a garage, some people use tiles, as they cope with high humidity and temperature extremes. Also, the tile is easily cleaned of dirt and does not deform. Its only drawback is its low strength.

Plywood sheathing

Builders recommend using plywood only for interior decoration of garages, as the material is poorly protected from high humidity. To increase its moisture resistance, it is necessary to pre-treat the plywood with special protective agents.

Wood trim

Among the most famous facing materials, wood is distinguished. For lining the walls in the garage, choose a tree that does not contain toxic substances.

Before use, wooden materials are treated with fire-fighting agents to increase heat resistance and an antifungal solution.

Drywall

Some for cladding use gypsum plasterboard systems with increased fire resistance and moisture resistance. Among the advantages of drywall are its low cost, ease of installation, flexibility and low weight. The main disadvantage of the material is considered its weak impact resistance, due to which the plasterboard surface is exposed to mechanical damage.

Lining

When lining the walls of a car garage, some use clapboards made of plastic or wood. The advantages of this facing material include:

the possibility of horizontal and vertical mounting;
ease of installation of the product on a frame or wall;
resistance to temperature changes.

Made of metal

The metal profile is considered to be durable and strong. He also copes with mechanical stress and temperature changes. However, despite all the listed advantages, builders do not advise using the material in high humidity, as it quickly rusts.

Corrugated board

It is a good material and is often used for interior wall cladding in a garage. It, like metal, is susceptible to corrosion and therefore cannot be used at high humidity levels.

Floor treatment

When interior decoration of the garage, not only the walls are processed, but also the floor. Different facing materials are also used for finishing the floor surface.

Wood

Wood is often used as a floor covering for garages, as it has a number of advantages. These include:

Environmental friendliness. Wood is an environmentally friendly material with antistatic and hypoallergenic properties. Thanks to this, many use it to cover the floor in living rooms.
Versatility. Wood flooring is versatile as it looks great in any room.
Thermal insulation. Wood is considered a good thermal insulation material.

Among the disadvantages should be highlighted rotting due to moisture and susceptibility to insect attacks.

Concrete

Often in garages, a concrete floor surface is made, which has the following advantages:

increased strength;
wear resistance;
resistance to moisture;
resistance to oils, fuels and other chemical fluids.

Among the disadvantages of concrete flooring are the difficulty of creating a floor. It is better to entrust such work to professionals who have repeatedly made concrete floors in car garages.

Asphalt and ceramic tiles

Asphalt chips are used to decorate the area that surrounds the garage. Some motorists use it to decorate the flooring inside the garage. This material is resistant to cold and moisture, and also provides a high level of adhesion of car tires to the surface.

Ceramic tiles, which are resistant to temperature changes and humidity, are considered a good substitute for asphalt chips. Ceramic products are divided into five classes that differ in their quality. For garages, the fifth class of tiles is used, since they are the most durable.

Self-leveling floor

Before you make a self-leveling floor in a car garage, you need to figure out how you can fill it. To do this, you can use:

Epoxy products. In the manufacture of such funds, resin and quartz sand are used. Cover the floor with epoxy and it will be durable and durable. Such coatings are waterproof and chemical resistant.
Polyurethane compounds. Polyurethane flooring is characterized by durability and strength. They are often used in rooms that are not heated in winter.

Features of finishing the heated and unheated premises

Before you start finishing work inside the garage, you need to understand the peculiarities of working in rooms with and without heating.

It is no secret that at very low temperatures mold with fungi forms on surfaces. They interfere with the work and therefore will have to clean the walls and floor of them in advance. Then you will have to raise the temperature in the room to at least 10-15 degrees, since at low temperature indicators, it is contraindicated to deal with finishing.

If in the future the garage will not be heated, materials with resistance to high humidity and low temperatures are used for wall cladding. In this case, experienced builders recommend using PVC panels for the walls and asphalt for the floor.

For amateurs who spend all their free time at the car, the inner lining of the garage is of particular importance. The article offers an overview of popular materials suitable for decorating a garage inside, and the criteria for choosing wall cladding, floor and ceiling in a garage room. After reading the article, you can choose the material that is best suited to the conditions of your garage.

The garage often serves several functions Source houzz.com

Finishing materials: 6 performance requirements

The modern construction market is overflowing with a variety of finishing materials, with a wide range of prices and characteristics. When choosing how to decorate the walls of the garage inside, it is important to remember that the garage is a technical building, therefore the cladding is selected in accordance with the specific use. Materials intended for interior decoration must meet the following performance requirements:

Mechanical strength... Wall and ceiling covering should be maximally resistant to mechanical loads of any type, both to impacts and to deformations (weight loads).

Resistance to chemical agents... A garage is a place for storing and using a variety of fuels and lubricants (fuels and lubricants) intended for repair and car care. Most of them (acids, oils, greases, fuels) are reactive compounds and dirty the floor and walls more often than we would like. Resistance to chemical attack is an important condition for the choice of material.

Garage - a place to store a variety of auto chemicals Source me.ayokonseling.com

Fire resistance... Most of the products used for car maintenance are flammable substances. The logical step would be to choose the most fire-resistant cladding.

Have resistance to temperature fluctuations... An especially important parameter if the owner does not plan to install heating. In this case, the cladding will have to withstand multiple fluctuations during one season, which is far from being possible for all materials.

Ease of care... Strong contamination is not uncommon for a garage, so the weak absorption of dirt, auto chemical products and odors, as well as ease of maintenance of the floor and walls (and sometimes the ceiling) surface, becomes a valuable quality.

Easy to update... It is good if there is a possibility of updating or additional protection of the wall material with paints and varnishes.

Finishing materials should not create problems when leaving Source roomadness.com

On our website you can find contacts of construction companies that offer the service of building small architectural forms on a turnkey basis. You can communicate directly with representatives by visiting the exhibition of houses "Low-rise Country".

Wall decoration: choice of material

Despite the severe restrictions on cladding, the question of what is the best way to finish the walls in the garage does not cause much difficulty. There is a considerable amount of materials that meet all of the above requirements, allowing you to design a garage not only in a practical, but also aesthetically attractive way. Cladding garage walls can be done using the following materials:

Ceramic tile

Ceramic tiles optimally match the operating conditions in the garage box; among its positive qualities are the following parameters:

Physical properties... Fire resistance, frost and water resistance.

Strength... Tiled flooring withstands high loads with dignity.

Easy care... The ceramics can be easily cleaned from dirt by dry and using detergents (including compositions with abrasives).

Tile decoration Source stroyfora.ru

Wide choose... The best option is clinker (especially for flooring) or porcelain stoneware, the number of varieties of which is almost inexhaustible. The choice is limited to a matte (non-slip) material.

Aesthetic appeal.

The use of ceramic tiles has its own characteristics:

Weight. Ceramics is a rather heavy material, therefore it is recommended to lay it on walls made of brick or concrete. The process of laying small piece material on a cement mortar is stretched over time.

The price of the material and its installation. The main limiting factor when choosing the inner lining of a garage.

Savings potential. High-quality clinker can be used as a floor covering, and for the walls choose a budget ceramic tile (or make the lower, more vulnerable layer from clinker, and the upper from porcelain stoneware). The walls are often finished with tiles to an incomplete height (1.5 m), plastered and painted above.

Tiles of dark shades - a practical solution Source stroyfora.ru

Plaster

When deciding how to sheathe the garage from the inside inexpensively, car owners sooner or later stop at the idea of \u200b\u200bplastering. The method attracts with its efficiency and speed of implementation, and the surface of the walls acquires strength, fire resistance and durability. When choosing this method, the following features are taken into account:

Walls. Stucco is best kept on walls made of concrete, brick, aerated concrete.

Base selection. Cement-sand based solutions are preferred.

Dyeing. After the plastered surface is dry, it is painted in the selected color. It is recommended to use facade paints - they have dirt and water repellent properties, are easy to clean and are not sensitive to chemical agents.

The limitation of the method is the need for professional skills in its implementation. Otherwise, work defects will appear at the first significant temperature differences (swelling, peeling and cracks on the surface).

Stucco Wall Decoration Source remontbp.com

Paneling

A popular way of interior decoration is paneling; it makes the room attractive, gives a habitable look and is ideal if thermal insulation is needed. When you know how you will use the garage, the choice of material is greatly simplified. If your garage will combine the functions of a service station and a workshop, you will need corrugated board with its strength and non-combustibility. If you plan to carry out only simple maintenance yourself, you can opt for PVC. If the garage is a place of restoration of mental strength with a parallel glaze on an iron friend, there are no restrictions on the choice of material. The garage is decorated with the following types of panel materials:

Cladding with PVC panels

Interior decoration of walls and ceilings with PVC panels is widespread and suitable for many owners of major garages; its advantages include the following qualities:

Availability. Nice value for money.

Physical properties. The material is moisture resistant, does not require additional processing (painting).

Panels for every taste Source th.decoratex.biz

Easy installation and unpretentious care.

Light weight. Plastic cladding of the gate does not increase the weight of the leaves, does not load the hinges and the frame structure.

Using the framework for fixing panels. It can be used for building insulation, for example, with slab mineral wool.

Cheap repair in case of damage. It is easy to replace one part without disassembling the whole structure.

The disadvantages of using vinyl siding as a garage finish include:

Low mechanical strength. When hit, the panel is easily deformed.

Temperature Sensitivity. You can purchase more reliable (and expensive) panels for facade works or special ones for a garage. Such material is designed for the fact that the garage most often does not heat up, and therefore has improved characteristics.

Video Description

About a non-standard approach to the design of tiled walls in the following video:

Wooden lining

The main raw material for the production of natural lining is coniferous wood, usually pine. Such material is cheap, convenient to process, and safe for health. Cladding of a garage room with a clapboard will pay off if the wood has undergone preliminary protective treatment with an antiseptic and a fire retardant. The positive qualities of wooden lining include the following properties:

Environmental friendliness and durability.

Availability for a wide range of consumers.

Simple and reliable installation. The lining is laid on a wooden lathing or on a plastered wall. The parts have a notch-comb connection system, so that they fit snugly together.

Strength and frost resistance.

Resistance to mechanical stress.

Natural texture and a large selection of natural shades.

Lining Source corrosion.ru.net

The disadvantages of wooden lining include the following features:

High hygroscopicity.

Bio-threat exposure. In a room with high humidity, the likelihood of mold and pests is high.

Flammability. Decreases slightly after using a flame retardant.

Difficult care. It can be difficult to clean the wall from oil stains, so it is recommended to cover the wood sheathing with a layer of varnish to prevent the wood from being absorbed.

Drywall

When thinking about how to sheathe the garage inside, many pay attention to drywall (dry plaster). For finishing the garage, it is recommended to use a material with improved moisture and fire resistance properties. Such sheets have the designation GKLVO, a characteristic gray-green color and red markings. The use of drywall carries obvious advantages:

Affordable price.

Light weight material. The sheets are attached to a special adhesive solution or a metal frame. The second method is convenient when the walls are uneven or insulation is needed.

Video Description

About decorating walls with wooden clapboard in the following video:

Simple assembly with a minimum of construction debris (compared to classic plaster).

Use as a basis. On the material (if it was used to align the walls), you can fix ceramic tiles or apply relief plaster.

Use as a partition. Plasterboard fixed to the frame is suitable if you want to allocate a place in the garage for a mini-warehouse or locker room.

Shape change. Drywall is suitable for the formation of not only flat, but also an arched structure (after preliminary preparation).

Facing garage walls and ceiling with plasterboard installed on the frame has its drawbacks:

Unprofitable for a small room. The frame reduces the already small free space.

Low impact resistance of walls. If cladding with durable material (for example, ceramic tile) is planned on top of the drywall, the deficiency disappears.

Sheathing with moisture-resistant plasterboard Source koon.ru

Sheathing with OSB sheets

As an option for finishing garage walls, you can find plywood and other wood-based materials. OSB (oriented strand board) sheets, which are made from a mixture of shredded wood and various binding additives, are well suited for the installation of insulated walls. For cladding garage walls (and ceiling), sheets marked OSB-3 or OSB-4 are the best option. OSP-3 material is the most common choice for finishing a garage. It is characterized by good strength and average moisture resistance, therefore it needs additional moisture protection treatment. OSP-4 is a more durable option with the following advantages:

Long service life.

Durability and resistance to temperature extremes.

Good moisture protection. The material does not deform under conditions of high humidity.

Mildew resistant (the composition contains antiseptic additives).

Video Description

About the varieties of garage floor coverings in the following video:

Interior decoration of the garage with OSB panels also has disadvantages:

Material refers to the highest category of combustibility (G4).

Harmful substances. The sheets contain formaldehyde resins, the evaporation of which is harmful to health, but, when ventilated, can be at an acceptable level.

Decking

One of the options for practical and cheap cladding is corrugated board - profiled steel sheet protected by a polymer or paint coating. Like the lining, it is convenient to mount it on a wooden crate. Decking has the following features:

Durability and incombustibility.

Resistance to temperature changes and aggressive environments.

Quick installationprovided with large sizes of material.

Main disadvantage corrugated board - susceptibility to corrosion.

Replacement bent profiled sheet will cost expensivethan repairing vinyl siding (PVC panels).

Sheathing with corrugated board Source buildingwork.net

Floor and ceiling finishes

The roof for garages is usually made flat. This saves money and effort, but along the way increases the likelihood of leakage when water after rain lingers on a horizontal surface. Therefore, the decorative lining of the ceiling in the garage is started after its waterproofing. One of the most common methods is plastering the ceiling with subsequent painting. Since the ceiling is not damaged, the choice is often made in favor of MDF or PVC panels. This is a popular and practical option that allows (when using a frame) to carry out insulation and hide communication systems.

Video Description

About the intricacies of the bulk floor in the following video:

There are special requirements for the flooring in the garage, it must withstand significant and regular weight loads from the car. Preferred floor coverings are the following options:

Painted concrete floor. A popular option that can easily support the weight of the car. A concrete floor covered with a primer weakly absorbs spilled auto chemicals, does not collect dust and is resistant to abrasion. Although the process of setting up a concrete floor cannot be called quick, many car enthusiasts stop at it due to the low cost and simplicity of the technology.

Tile. The garage floor made of ceramic tiles (or ceramonranite) looks neat and often original. The coating is beneficial for its durability, easy maintenance and resistance to fuels and lubricants. The use of tiles is limited by its high cost and the rather laborious process of creating tile coverings (including mandatory waterproofing).

Ceramic tile flooring Source koon.ru

Bulk concrete. Impact-resistant coating with a perfectly even surface, not inferior in strength to the classic concrete floor. One of the most successful coatings for a garage, as it has frost resistance and increased resistance to chemical environments. The disadvantage of this method is the high price of the composition, because of which the bulk floor can not be called an economical option. Another subtlety - the base for pouring should be perfectly even, which is not always achievable.

Wooden floor. The choice in favor of wood flooring (floorboard) is not often made, although the subfloor for such a floor does not need to be leveled. Many people believe that there are more disadvantages to this floor than pluses - flammability, a high degree of absorption and low strength. Proponents argue that working on a wooden deck is much more pleasant and healthier; in addition, wood (unlike concrete) does not form dust.

Self-leveling polymer floor Source ko.decorexpro.com

Conclusion

Interior decoration is an important part of the garage space arrangement. Correctly selected finishing materials keep the car clean and tidy and help to extend the life of the vehicle.

Is the second home. Here, many "men" spend all evenings and weekends. Therefore, the improvement of this additional "living" area is important. Even if this is not the case in your case, then anyway, any person wants to feel cozy and comfortable in the room. And in this situation, it is important how to sheathe the garage inside. What materials can you use? Some options will be discussed in this article.

Requirements for finishing materials

To sheathe the walls of the garage it is very important to choose the right material. Not only the appearance will depend on this, but also the safety and the duration of operation. So, the material must meet the following requirements:

resistance to mechanical stress;
resistance to chemicals;
no fear of temperature changes;
incombustibility;
ease of care;
aesthetics.

These are general material requirements. Everything else will depend on the taste and financial capabilities of the garage owner.

Plaster is the cheapest option

The use of sand-cement mortar for wall decoration in non-residential premises is an old and proven method. A layer of plaster will protect against excess moisture and slightly insulate the garage. In addition, cement and sand are non-flammable substances, which means that the level of fire safety increases.

The plaster mortar is prepared in the usual way. For one part of cement, three, four or five (depending on the brand of cement) parts of sifted sand are taken. Then, using a trowel, the mixture is applied to the surface. If the walls are uneven, several coats can be applied.

To increase durability and improve appearance, all walls can be painted. For these purposes, it is better to take waterproof or facade paints. In this case, the surface can be washed.

Use of ceramic tiles

Another popular way is to use ceramic tiles. This finish is not afraid of fire, mechanical stress and chemicals. Also, the tiles are easy to clean, and (subject to installation technology) it is not afraid of water.

As a more reliable option, you can choose clinker tiles. Such material is made of special clay using special firing. As a result, all the pores of the tile are closed, and it is absolutely not afraid of water. But such finishing material is quite expensive.

Finishing walls in a garage with tiles (ordinary ceramic or clinker) requires certain skills. In addition, such a material is quite heavy, so only strong walls can withstand such a load. Finishing tiles can be used if the garage is built of brick or concrete.

A newly built garage will shrink, so tiling is undesirable until this process is complete.

Wood finish

Quite often, wood is used to decorate walls in a garage. With wood panels or clapboard you can pretty quickly and without dirt beautifully decorate the interior. Moreover, it will be relatively inexpensive.

But this material has a number of disadvantages. First, the tree burns well. Therefore, this finish increases the fire hazard. Secondly, wooden structures can begin to warp due to temperature changes and changes in humidity. This will seriously affect the appearance.

Wood absorbs odors well. After a long period of use, garage walls can start to smell very unpleasant.

But there is one alternative. The walls in the garage can be sheathed with oriented particle boards or OSB. This material is 90% wood chips, and the rest is special waterproof resin. Due to this composition, the stoves do not burn, are not saturated with smells and are not afraid of excessive moisture. The OSB structure allows you to keep the nails driven in well and one more plus - there is no danger of damage by insects (which can not be said about an ordinary tree).

The use of plastic panels

You can use modern material. Plastic panels are perfect for decorating walls in a garage. This material will not burn or be damaged by excessive moisture. In addition, the walls can be easily washed, which is very important for keeping the garage clean.

It is better to use facade materials as panels for decoration. They are stronger and more durable. But even these panels have one significant drawback - they are fragile. Plastic can easily break from a strong blow.

When choosing material for wall decoration in a garage, you need to weigh the pros and cons, look at the photo and choose the suitable option. It is important to understand for what purpose you will use the garage. If renovation work is constantly carried out in it, then it is better to choose reliable plaster or strong ceramic tiles. If the garage is needed only for storing the car, then wood or plastic panels can be used. They are not as durable and practical, but they have a more attractive appearance.

Video

This video shows how the garage is covered with a professional sheet:

Photo

25020 1 3

Do it yourself garage - all the most popular options

Each owner has his own idea of \u200b\u200bhow his garage should look. One needs a simple metal box, and the second seeks to create a comfortable and warm house for your car, in which you can put the car, and if necessary, bring down a shelf, and meet friends, such a mini-club of interest. Accordingly, the finish of the garage inside and out will be different. In this article I will try to highlight the most popular options for decorating garages today, and the emphasis will be on self-arrangement.

What does finishing work in garages include?

All structures of such a plan are divided into solid block and light metal structures. Naturally, both the materials and the finishing technology will be different in each case.

But no matter what house you choose for your car, the general technology includes four main areas:

The first and perhaps most important is the arrangement of the walls from the inside and, naturally, from the outside.;
A sore and no less problematic question has always been considered, what to trim the gate;
Whatever one may say, but the car still has a decent weight and a solid floor in the garage plays an important role. Moreover, the problem doubles if the owner wants to equip himself a cellar or a viewing hole;
Ceiling decoration can be called desirable rather than mandatory, but we will also touch on this issue.

Since the finish of the floor, ceiling and doors in all garages is generally similar, I will discuss these areas below in separate chapters. And we will begin our conversation with the options for wall decoration in block and metal garages.

How and how to decorate the walls in block structures

In this case, block structures mean buildings made of brick, cinder block, foam or aerated concrete, as well as solid or prefabricated reinforced concrete structures.

Of all the above materials used for the construction of garages, foam and aerated concrete require a special approach. It is strictly forbidden to leave these materials without finishing, since they are hygroscopic, that is, they can be quite saturated with moisture.

Good old plaster

As long as there is capital construction, so many people plaster buildings. Therefore, the list of how to decorate the walls of a block garage is traditionally headed by stucco.