Evergreen tree - palm from plastic bottles. Leaves of Plastic Bottles Leaf of Plastic Bottles

Summer residents spending summers on household plots, by autumn, are faced with the problem of recycling plastic containers from various kinds of soft drinks. Palm from plastic bottles may be an unexpected way of turning garbage into a garden decoration.

How is this possible? It is very simple, if you carefully study the instructions on making palm trees from bottles, prepare everything necessary tools, supplies, and be sure to stock up on a good mood.

Palm from bottles: possible benefits and uses

As is known, used for production food packaging plastic does not decompose for hundreds of years when it enters the soil. A centralized removal of this kind of garbage is not organized everywhere, and nobody wants to litter nearby territories with plastic waste. What to do to a summer resident in such a situation? Is it really necessary to bring plastic bottles to their city?

Do not rush! If you carefully collect the bottles of brown and green plastic, in the off-season with the whole family in the evening you can turn this container into an unusual evergreen tree.

A palm tree from bottles will perfectly decorate:

• house territory;
• unsightly corner of the garden;
• plot next to farm buildings;
• playground
• border of land near the open.

A palm from plastic bottles according to the instructions below can be a spectacular decoration at any party, wedding, themed evening or children's party.

Making an original decor item will not cause difficulties even for people who are far from this kind of creativity. The main thing is, before you make a palm from plastic bottles, prepare everything you need.

What do you need for a palm from plastic bottles?

What should I stock up before starting work? First of all, the home craftsman will need plastic bottles of green and brown. Green ones are blanks for tree foliage, and brown ones are future trunks of the evergreen beauty. At the same time, the height of the plant and the splendor of the crown directly depend on the number of containers collected.

Scroll necessary materials and tools for creating palm trees from bottles includes:

• plastic containers;
• sharp clerical knife and scissors;
• durable adhesive tape;
• metal bar or plastic tube for the barrel;
• thick rope or braided wire for the base of the leaves.

When choosing plastic bottles for palm trees, you need to consider that trunks and leaves made from containers of the same diameter look better. If there are smaller green bottles in stock, they can be used for leaves in the middle of the crown, but brown small vessels will have to be used for tree trunks of a different type or size. Different shades of plastic are not a hindrance. They only give the man-made plant liveliness and brightness.

Palm from bottles: manufacturing instructions

A step-by-step description of all the subtleties of creation plastic wood it will help quickly, literally in the evening, in stages, a palm tree made of plastic bottles of the intended height.

The process consists of three operations:

• leaf assembly;
• creating a trunk of a plastic plant;
• connection of all parts and installation of finished wood.

Before you make a palm tree from plastic bottles, be sure to wash the container and remove all paper and film labels from it.

Although there are a lot of options for creating a plastic tree, the most lush long leaves with any chosen method are obtained from large, for example, two-liter bottles.

Creating a crown of palm trees from bottles

In prepared green bottles, the bottom part is cut with a clerical knife or scissors. She is no longer needed, and the upper half will become a blank for the sheet.

Toward the neck, it is carefully cut into thin longitudinal strips. The larger the diameter of the plastic bottle, the thicker and more magnificent the green palm leaves will turn out.

These are not the only options for creating leaves. If you cut the upper part of the plastic bottle, as in the photo, into four “petals”, and then cut each of them several times, you will get beautiful feathery foliage.

The resulting leaf fragments are sequentially strung on a strong rope or durable electric cable. The lid is surely screwed onto the first workpiece in order to fix the “petiole” of the sheet at the top with a knot. Similarly, the last part of the bottle is twisted.

A palm from plastic bottles can have a tip of any size, but trees whose crown consists of no less than 5–7 leaves look better.

At the base of the finished palm leaves should be a long stalk, then to collect and securely fasten the entire structure.

Assembling a trunk of a palm tree from bottles

To get a tree that looks like a natural tree trunk, you will need almost the entire bottle, except for the bottom itself.

From the bottom almost to the neck of the bottle, longitudinal cuts are made on brown bottles, dividing the container into equal petals.

Only a small fragment of the bottom goes to waste

This is how the finished part of the future trunk of a palm tree from bottles looks like.

The assembly is carried out in the same way as the green leaves of the tree were collected. To fix a palm tree in an upright position, its trunk will need a strong, rigid core. It can be made from a metal bar of suitable length and diameter, or a tube.

Assembling palm from plastic bottles

Ready palm leaves are attached with glue or tape to the top of the tree so that they form a uniform, diverging crown on all sides.

It looks like the finished top of the tree.

The design is quite heavy. Therefore, it is desirable to fix it with the help of such a heavy base. If you make a welded platform there is no way or suitable material, a rigid plastic or metal base of the stem is buried at least half a meter. Such a peculiar “root” in the pit is reinforced with crumb brick and compacted after filling with soil. Large trees are best concreted.

A video on how to make a palm tree out of plastic bottles for a personal plot will explain all the nuances of the creative process, and will help turn your yard or garden corner into a real oasis.

One of the options for making palm trees from bottles - video

Then instead of throwing them away (thereby polluting the environment), you can make a lot of crafts from them.

Crafts can be crafted with children or on their own. Themand You can decorate a house, garden or cottage.

One such original crafts - palm tree. Having created such a palm tree from plastic bottles, you can decorate it with any garden or cottage. She looks beautiful, and for its manufacture does not need to be a great specialist.

Plastic bottle palm for beginners

You will need:

Plastic bottles (preferably green and brown)

Scissors

Drill or awl

Metal rod, straight branch or thin plastic pipe.

* First, wash all bottles and remove labels from them.

1. Cut the brown plastic bottles in half, and then cut the bottom half in a zigzag pattern.

2. Cut the green bottles along to get a few halves. Cut the fringe on both sides of each half.

3. Make a hole (with a drill or awl) at the bottom of each of the brown halves. The hole should be exactly the thickness of the rod.

4. Take a rod (metal, wooden or plastic) and place brown halves of the bottles on it.

5. Green bottles (palm branches) can be attached to the crown of the trunk using a thin wire that slips into each branch and into the trunk, and its ends are twisted.

How to make palm from plastic bottles

You will need:

2 liter plastic bottles

Scissors or stationery knife

Wire

Plastic or wooden rod

Glue or tape.

Make crown

1. Cut the plastic bottle in half (across). Leaves will be created from the top.

2. Cut the half of the bottle into strips extending to the neck.

* You can also cut the bottle into 4 petals and cut each petal several times.

3. Take the wire and begin to string on it blanks of green bottles (palm leaves). It is worth noting that you need to tighten the lid on the very first workpiece, so you can fix the green leaf stalk in a knot. It is also worth doing with the last part of the bottle.

* That palm with about 6-7 leaves looks beautiful.

* The base of the leaves should have a long stalk to make it easier to fix the leaves to the palm.

Making a palm trunk

1. Cut the bottom off the brown bottle, leaving almost the whole bottle intact.

2. Cut the bottle from bottom to top into 5 wide strips (see image).

3. Begin stringing brown blanks on a strong metal, plastic or wooden rod to get these palm trunks.

We collect all the details

To attach leaves to the trunk of a palm tree, use glue or scotch tape. It is advisable to evenly distribute the leaves to obtain a symmetrical crown.

It is no secret that empty plastic containers for various drinks cause a lot of inconvenience with disposal, since it does not decompose for many years. And the removal of this kind of garbage will cost too much.

Modern gardeners gardeners use PET bottles not only for storing water and other liquids. After all, you can use it in a very interesting solution: to build a unique palm tree from bottles with your own hands on infield, which will undoubtedly attract the curious glances of passers-by.

For the manufacturing process, you will need only the usual set of tools, dexterity and excellent mood.

The benefits of PET containers: a beautiful palm tree

Do not rush into the release of empty polyethylene bottles, they can easily be turned into a unique evergreen palm, which is painted on a summer cottage. It is also possible to equip the courtyard near the house, a playground, profitably disposing of a sufficient amount of waste.

Before making a palm tree out of bottles, you should stock up on a used container of brown (for the tree trunk) and green (for leaves) color in advance. It is better to take containers of 1.5 and 2 liter volume. The height of your southern "beauty" directly depends on the number of accumulated bottles.

A set of the following tools and parts will come in handy:

• sharpened scissors and knife;
• scotch;
• a cord or braided wire on which the foliage will be held;
• plastic pipe or iron reinforcement for the base of the trunk of a palm tree.

It is important to consider that the aesthetic appearance of the future tree depends on the same diameter containers. But the combination of different shades of green will only give the palm a bright unique look.

Phased work

Foliage assembly

Prepared Bottles green color it is necessary to cut the bottoms with a knife, and the top will be just a piece of blank. The remaining part is carefully cut into strips with scissors, heading towards the neck of the bottle. Consider, the thinner the cut strips, the more magnificent the crown of the palm will turn out.

We do this until we get the right amount of foliage, which we then need to string on a tight rope, cord or wire. On the first and last details, it is necessary to tighten the lid, to further create the leaf stalk.

Tree trunk assembly

For brown bottles (at least ten pieces) we cut only the bottom, then longitudinally make cuts of the same size right up to the neck of the bottle - these are the petals of the barrel. It is better if you get six equal, fairly wide stripes along.

The finished trunk is assembled similarly to the crown of a tree (barrel blanks from bottles are strung on the base), as shown in the photo of a palm tree. The base of the tree is made using metal or plastic pipe desired length and diameter.

The prepared palm crown is fixed with glue or tape to the top of the head to get a uniform fluffy foliage.

It is worth considering that the finished craft will be completely difficult, which is why it is reasonable to take a heavy base for the trunk, which is dug into the soil for half a meter, or poured with concrete mortar.

A beautiful evergreen palm tree from empty plastic bottles that brings warmth in both winter and summer is ready! In such a simple way, it is possible to independently create a paradise in the southern corner of the free garden square.

If you turn on the scope of imagination, you can erect coconut fruits on the finished palm tree. This idea can be realized from a contrasting shade of bottles, or small bottles from under the juice, which will undoubtedly please children who will frolic near a tree.

Recycling many unnecessary plastic bottles that have accumulated in the country over the summer is difficult. But there is a simple way out of this situation. All empty containers can be turned into beautiful garden decorations. One of such decorations is a palm-made palm tree made of plastic bottles. Phased production and good mood will help to cope with the task in two counts.

Ways to use plastic

Decomposition process plastic material lasts for 100 years. In order not to pollute the environment, waste removal from plastic has been established in any area. But there are some suburban areasfrom which waste is not removed. In this case, conscientious summer residents take out the bottles on their own. In order not to do unnecessary export work, in one evening you can make plastic bottles palm tree. It is enough to collect all the colored containers on the site. You can decorate with palm trees:

There are three ways to make a palm tree out of bottles. Each of the methods will help to realize their creative fantasies and create a real work of art from plastic. This masterpiece will be a real decoration for any site.

Types of decorations of a summer cottage

There are many options by which you can make an artificial palm.

Thereby, appearance tree can be any.

Types of designs are:

• With smooth trunks or in the form of petals. Sometimes a log is used as a base.
• High and low.
• With spreading smooth leaves or with a fringe.

Large palm making

To make a palm tree large sizes, you will need a lot of plastic bottles. They begin to collect in advance, connecting the whole family and relatives to the process. For work, you need the following materials:

• Plastic bottles of various colors. A barrel is made from brown containers, and leaves are made from green bottles.
• A metal rod is used for the trunk, a thick wire for leaves.
• Wide tape, scissors and a sharp knife.

Raneti apples: varieties, benefits and planting of fruit trees

You need to know the more bottles collected, the more magnificent the crown of the plant will be. To make the trunks and leaves look smoother and better, containers of the same size and diameter are used for the manufacture. Other sizes should not be thrown away. Leaves are made from small bottles and inserted into the middle of the crown. At this point, different sizes of material will not be visible. But they cannot be used for the trunk. From narrow brown containers build trunks for other types of trees. Different shades of the container will make all crafts from plastic bottles brighter and richer. Palm tree step by step:

Growing persimmons from bones at home

Tree with unusual leaves

In addition to a large tree, there is another way to make palm trees. It is a little more complicated, but differs in special originality. If you follow all the instructions step by step, then making a palm tree out of bottles will not be difficult. The work process begins with the manufacture of the barrel:

All elements are strung on a metal cable or cable and form a tree.

Bottle bottoms design

For the manufacture of this palm tree you will need 2 times more bottles. Because the whole structure consists of bottoms. Phased procedure:

If you additionally decorate the palm tree and the nearby territory with other crafts, then the site will look even more interesting. For example, from plastic bottles you can make monkeys, bees and pigs. Interesting look swans made from car tires.

Together with our son, we agreed to make a palm tree out of plastic bottles for the garden. It turned out that there are a considerable number of ways to implement the idea. Wanting to get the best specimen, we tried several assembly schemes for an exotic plant, which we will talk about.

Conceiving the installation of palm trees from plastic bottles, we fully felt the main problem: a huge amount of packaging is needed! It should be borne in mind that all this bottle abundance must be washed, cut and assembled with your own hands. From the scissors my son got corns. In the process, it was discovered three ways to resolve the issue:

• make a small tree;
• use technology with less material;
• paint transparent bottles.

As a result, we decided to make a medium-sized tree. They painted just three bottles. They achieved the use of containers with almost no scraps, that is, 90%. They spent 35 brown and as many green plastic bottles on the whole product. Here is a description of the creation of what you see in the photo, as well as DIY assembly schemes for a small and large tree. We made a man under a tree of plastic bottles earlier.

The trunk assembly for medium-sized palm trees

We begin the assembly of the tree from the trunk. It will require a metal tube, which in diameter easily passes into the neck of the bottle. The tube should be 50cm longer than the palm: this part will be in the ground.

We used a 150cm tube to completely assemble the barrel. For installation on the ground, a reinforcement 1 m long was hammered into the ground at 50 cm, on which a tube of a palm-bearing supporting structure was put on. The following is step-by-step instruction and assembly diagram of crafts for the garden. The step numbers hereinafter correspond to the numbers in the pictures:

The result is a palm trunk. The diameter of the tree is not the same due to the use of different bottles, but in nature it happens.

Small palm trunk

We know that on the surface of the palm tree there are uneven protrusions of the remains of branches. At a short distance they are clearly visible, so a trunk of a different design is better for a small tree.

A small palm tree can be installed in the cottage right next to the wall of the house. In this case, you need to perform the following operations step by step:

Large palm trunk technology

There is a third way to make a palm trunk. If we want to make a large tree at a cottage that is close in size to natural, the examples already considered will not work because of the disproportionately small diameter of the trunk and the fragility of the structure. In this case, it is necessary to cut off the lowermost parts of the plastic bottles, and then drill and fasten them with screws or nails to the log. Of course, packaging will take a lot.

Workshop for making crown for medium-sized palm trees

Now let's take a look at the crown of an exotic tree. For its assembly, we also chose a design with full use of plastic bottles. Bottles are different, and we divided them into five groups in advance for five branches of the tree, trying to ensure that all sets were approximately the same. To assemble the crown, you need to perform the following steps step by step:

Like the trunk, the palm crown can be done in many ways. It is very convenient to choose the necessary option, based on the size of the tree. Returning to the sample of medium size, you can make a more fluffy crown. However, in this case, you will have to cut the bottles in 5mm increments, that is, do yourself three times as much work. In addition, in this case, only the upper third of the bottle is used, which will require three times as much starting material.

We make a crown for a small tree

Now we’ll give a master class on making a crown for a small palm tree. This craft is well suited for beginners. In this case, it takes significantly more time to work with each part, but it will take noticeably fewer bottles, and the crown of the tree will have a more natural appearance with a small distance to a small tree.

Such a crown will require only a few bottles. The step-by-step instruction will be as follows:

Other manufacturing options for artificial tree crowns

Note that palm leaves can be cut using different pattern. If you wake up a fantasy, you can come up with something new and make your own palm from a plastic container.

Please note that for the manufacture of large wood, the crown shown in the photo below is a good fit.

Already having some experience, we understand that this option will require a large amount of source material. As you can see, only the lower parts of exactly the same bottles strung on a wire are used here.

So that the individual links do not enter each other, the upper part of each workpiece is cut and bent inward.

We hope that you get the best palm from plastic bottles. The following video will help you clarify the missing details.