Kermi FKO - side connection. Are Kermi radiators suitable for apartments with central heating system Elegant appearance
Why is it better to install Kermi steel radiators?
Steel panel radiators Kermi (Kermi) long and well known to Russian consumers. The strong reputation of the global brand allows you to count on high level quality, and these calculations are invariably justified. Successful laconic design that fits perfectly into any modern interioras well as wide the lineupallowing you to choose from a large number modifications are the best option, they allow using Kermi in rooms of any configuration. The two-layer anti-corrosion paint has practically the same coefficient of thermal expansion as steel, which ensures the highest durability of the protective and decorative layer.
Using steel radiators Kermi is justified both for residential or office premises connected to the central heating system, and for individual heating systems installed in houses, cottages and apartments. They can be used both at operating temperatures of the coolant up to 110 degrees Celsius, and in low-temperature heating networks. It should be borne in mind that the operation is designed for operation in a heating system with forced circulation of the coolant.
Manufactured stainless steel batteries with the use of the patented ThermX2 technology, which saves up to 11% of thermal energy. Each of the two modifications (with or with connecting heating pipes) is produced with high degree variability in overall dimensions and heat output. This makes it possible to choose for the premises different sizes batteries on an individual basis, which will eliminate the waste of energy for heating the house as a whole.
Kermi radiators are a guarantee of the flawless functioning of the heating system at home, not only for you, but also for your children and grandchildren.
Adaptation of radiators to domestic standards
Sometimes, when choosing imported heating radiators, the buyer is faced with a discrepancy between their design and domestic radiators: in most European countries, a two-pipe heating system has been adopted, while we traditionally operate a one-pipe heating system. By purchasing steel panel radiators Kermi (Kermi), you can be sure that this will not happen: all heating devices supplied to the markets of the CIS countries are manufactured already adapted to our standards and are perfectly installed in thermal systems apartment buildings.
Modifications and markings of the Kermi radiator
Kermi radiators are available in two modifications:
1) FKO - with lateral connection to the heating system. In addition to the device itself, the kit usually includes a Mayevsky crane and a wall bracket.
2) FKV - with bottom connection to the heating system. Distinctive features are the presence of an external thread and a special thermostatic valve. To regulate the intensity of heating, you should additionally purchase a thermostatic head.
ThermX2 technology and its benefits
The main difference between Kermi heating radiators, manufactured using ThermX2 technology, lies in the principle of distribution of the heat carrier flow inside the plates. If they are usually connected in parallel, i.e. the coolant from the supply pipe is distributed immediately to all plates at the same time, then the products kermi have a consistent coolant distribution scheme.
It is important that the coolant primarily flows through the face plate, which, due to this, heats up faster than the others and immediately begins to give off heat to the surrounding space. Thus, the rate of room heating increases by about 25%. The emitted thermal radiation quickly warms up the air in the room, after which the convection heating scheme begins to work: the air, heating between the plates, rises up, and its place is taken by heavier cold air, which also heats up, etc.
But on this the advantages of consistent thermX2 technology do not end. Since the coolant enters the front plate first of all, its temperature when flowing through it is maximum. Consequently, the thermal radiation given off by the plate is also maximum for a given temperature of the coolant. The intensity of heat radiation increases from 50% to 100%, depending on the type of battery used.
Efficiency and economy Kermi
Thus, the designers of the company Kermi (Kermi) were able to achieve growth heating system efficiency without the use of additional heating. The overall energy efficiency of the heating system when using this type of heating devices increases by 10-11%, which means that to achieve the same thermal performance in this case, 10% less energy is consumed than usual. Water is also consumed less intensively, its savings reach 20%.
The reliability of Kermi
No less important for the consumer is the operational reliability of products. Kermi uses only high-quality steel with a minimum thickness of 1.25 mm for the manufacture of radiators. The metal is covered with a patented protective paint and varnish coating, which includes an iron phosphate treatment and two layers of a special heat-resistant varnish. Thanks to this, the products remain flawless appearance and flawless performance for 25 years or more.
Elegant appearance
Small size and elegant appearance brand Kermi allows them to fit perfectly into almost any interior. If desired, you can purchase side screens or choose a model with built-in, in this case, the design of the heating devices becomes completely flawless in terms of modern aesthetics.
Heating system country house with closed circulation of the coolant for optimal operation, it should be equipped with steel panel radiators. This solution allows you to maximize the heating area of \u200b\u200bthe room and reduce thermal inertia. Radiators Kermi FKO for more than half a century have been in stable demand in their market segment and provide reliable operation at low energy costs.
The company "North-West" offers high-quality steel radiators Kermi, which are actively used for heating systems of autonomous and centralized type. The products are distinguished by excellent technical characteristics, convenient and safe to use.
At the same time, Kermi steel panel radiators have an attractive appearance. In the standard version, the color of the products is white, other colors are made to order.
Variety of models bimetallic radiators heating "Kermi" allows you to equip rooms of even the most intricate configuration so as to save space and provide the desired temperature regime. The width of the batteries is from 59 to 155 mm.
STEEL radiators Kermi are made of sheet steel. It is a durable and flexible material that can withstand various loads. Products made from it have an increased specific thermal power. The external coating of the radiators is varnish, environmentally friendly, heat-resistant and durable. Specifications allow the installation of these products to one-pipe and two-pipe heating systems.
Steel radiator "Kermi" FKO with side connection for mounting has four side holes with an internal thread 4 × G 1/2. Reliable screw connections prevent leakage. A wide range of sizes will allow you to choose a product for an apartment, cottage or summer cottage, depending on the dimensions of the window sill and window openings. The standard package includes a Mayevsky crane, a plug, a mounting kit for wall mounting. Bottom-connected radiators are equipped with a thermostatic valve.
The new X 2 technology saves 10-11% on energy costs. First, the front panel heats up and the rear panels are used as a screen, creating efficient heat transfer. Only if necessary, additional heating of the rear panels is connected. Heating of premises with steel radiators "Kermi" Тherm X 2 is 30% faster than with conventional flat radiators. If we add here a low loss factor and a high level of heat transfer, then we get equipment with excellent efficiency.
Kermi FKO radiators are easy to install, and the valves built into them will help to control these modern high-tech devices that make our life more comfortable and easier. Each product is equipped with detailed instructions, thanks to which the installation of "Kermi" batteries with bottom or side connection can be carried out independently.
The "Kermi" batteries, which are connected in a lateral way, also allow the installation of additional convector grilles. This is done to increase the heat dissipation of the panels.
The manufacturer recommends the installation of steel panel radiators exclusively in closed heating systems. Nevertheless, buyers often contact us with questions, such as: Is it possible to install Radiators Kermi FKO 22 in the apartment? However, it is not possible to answer unequivocally here, we will explain why below.
Kermi - famous manufacturer panel and design radiators, heated towel rails, regulators and other components for heating systems. For more than 55 years, the manufacturer has become an innovator in this area and has managed to earn the love and trust of customers. And not even thanks to the sensational Therm x2 technology, but rather because of the high quality of the products, long service life and, most importantly, the ultra-durable and environmentally friendly radiator coating.
The most demanded and popular model is a radiator Kermi 22 500 500... It is distinguished by optimal technical parameters for heating a medium-sized room and at an affordable price. Many people prefer radiators Kermi 22 types with bottom connection, since this design allows you to hide communications in the floor.
Steel radiators in general and this model in particular are not intended for use in central heating systems. There are several reasons for this:
- Steel Radiators Kermi 22 demanding on the quality of the coolant, i.e. it should contain the smallest amount of oxygen (up to 20 μg / dm3). If in autonomous system heating it is possible to track this factor, then in the central system it remains to hope for the conscience of the housing and communal services organization supplying water. Untreated water leads to corrosion and leaks.
- The product is designed for a maximum pressure in the system of 7-10 atm. In the central system, it just reaches these parameters. But with constant operation at maximum load mode, any equipment becomes unusable faster. Thus, the service life Radiator Kermi Type 22 will be much lower than autonomous.
- The maximum temperature of the coolant for which the Kermi brand steel radiators are designed is 110 degrees. This factor is also easy to control in the heating system of a private house.
The heating system often requires heating radiators (radiators). It is they who carry out heat exchange between the coolant and the room air.
The company site offers a wide range of heating radiators that are used in centralized and private heating systems:
● steel panel;
● tubular;
● bimetallic;
● aluminum.
To select the optimal batteries for a specific heating system, it is necessary to take into account the characteristics of each type.
Panel heating radiators
Panel heating radiators are distinguished by their ability to work with all types of heat carriers. The absence of gaskets and unnecessary connections in their design guarantees a low probability of leaks during operation.
The selection of the power of panel batteries is carried out not only based on their length and height, but also depth. This is due to the fact that each model has a different number of heating elements and fins.
In the online store site, panel heating radiators are represented by several brands: Kermi, Rifar, Buderus, Vogel, Korado.
Features of panel radiators Kermi
Kermi heating batteries are two plates with vertical channels squeezed out inward, intended for the passage of the coolant. To increase the efficiency of heat transfer, some models of radiators have additional fins on the outside.
A distinctive feature of Kermi panel radiators is the specific path that the coolant takes. So, first it goes to the front of the panel and only then to the back. Due to this, a quick and uniform heating of the room is ensured, where batteries from a well-known German brand are installed.
Panel radiators Buderus
German Buderus radiators are distinguished by a wide variety of models that are designed for both side and bottom connection. Everyone can buy a Buderus panel radiator, regardless of the heating system used (one-pipe or two-pipe).
The production process of Buderus radiators is fully automated, which guarantees high quality finished products and its compliance with GOST standards.
The website catalog contains models of panels with a length from 40 cm to 300 cm and a height from 30 cm to 90 cm.
Panel radiators Vogel
Among manufacturers of radiators, Vogel is distinguished by the unusual design of its products. Vogel panel radiators are assembled exclusively from high quality steels, which guarantees their reliability and efficient operation. And to provide additional corrosion resistance, Vogel batteries are treated with a special compound inside.
Panel radiators Korado
Corado heating batteries of Czech origin. They are designed to operate exclusively in closed systems where the operating pressure of the coolant does not exceed 10 km / cm 2. Moreover, the design of the radiators is such that it provides maximum air permeability.
In the online store, the site contains models of Korado panel radiators with both bottom and side connections to the heating system. In addition, the range includes batteries from one to two panel designs.
Tubular heating radiators
Tubular radiators are a classic option. Their design is made of welded together steel pipes... Tubular radiators are an optimal alternative to aluminum counterparts. They can also be used in most heating systems: closed, open, low temperature. A similar result is achieved due to the use of special steel in the manufacturing process, which, with a thickness of 1 mm, is capable of withstanding an operating pressure of up to 12 kgf / cm 2. Therefore, tubular radiators can be installed both in private houses and in apartments with a centralized coolant supply.
On the website of the online store site you can buy tubular heating radiators in Moscow from the manufacturers Arbonia, Zehnder Charleston and Irsap Tesi.
Arbonia tubular radiators
The Arbonia range of radiators represents products that are perfect for use in apartments or private houses, schools, restaurants and other public places.
The width of one section of Arbonia tubular radiator is 4.5 cm, and the number of pipes is from 2 to 6. The upper and lower manifolds are made of pressed steel. The height of the batteries ranges from 18 cm to 3 m.
Depending on the connection method, Arbonium tubular heating batteries are bottom and side.
Tubular radiators Zehnder Charleston
Tubular heating radiators Zender are the first radiators of this form factor. The debut models of the devices were released in 1930.
Zehnder Charleston tubular radiators are produced in five versions, the difference between which is in the number of heated pipes per section: from 2 to 6.
The minimum battery length is 9.2 cm, and the maximum is 3 m. At the same time, their height starts from 19 cm and ends at 3 m. Such a significant range of dimensions of Zehnder Charleston tubular radiators allows everyone to choose the appropriate model for specific operating conditions and heating system.
Tubular radiators Irsap Tesi
Irsan Tesi heating batteries are presented exclusively with a side connection type, which entails some restrictions on their installation. The radiator sections have the traditional width for this type of device of 4.5 cm.The height of the batteries differs in a limited range: from 36.7 cm to 56.7 cm.
By default, tubular radiators Irsap Tesi are painted in white enamel, however, the manufacturer, on request, produces models in any colors RAL standard.
The maximum operating pressure for Irsan Tesi heating batteries is 10 kgf / cm 2, which is quite enough for both centralized and individual heating systems.
You can buy tubular radiators in Moscow at a bargain price in the online storekermi - fko .ru.
Bimetallic heating radiators
A bimetallic type of radiators is made of two metals: a steel core and an aluminum alloy shell. The first material helps the battery withstand increased pressure, which during multi-storey systems apartment heating reaches 12 kgf / cm 2. Aluminum alloy is an excellent conductor of thermal energy from the coolant to the room air. Bimetallic radiators are highly resistant to corrosion and various chemical elements.
Rifar bimetal radiators
Domestic heating batteries Rifar are manufactured using a unique patented welding technology. It provides high reliability and durability of the structure. At the same time, the price of panel radiators in Moscow is significantly lower than their foreign counterparts, because production facilities are located in Russia.
You can get acquainted with the full range and buy Rifar panel heating radiators in Moscow in the online store website.
Due to the sectional design of bimetallic batteries, it is allowed to change the number of sections directly during their installation.
Radiators Global (Heating batteries Global)
Global bimetallic heating batteries, regardless of the line, can be installed in centralized and individual heating... This versatility is ensured through the use of a unique technology for manufacturing radiators.
The symbiosis of steel and aluminum allows for unique results in strength and calorific value. So, in order to change the temperature of the Global radiator, you do not need to wait until it heats up or cools down. The adjustment process takes only a few minutes.
Depending on the modification, Globex bimetallic heating batteries differ in the following technical characteristics:
● height - from 20 to 80 cm;
● the size of one section is 8 cm;
● working pressure up to 35 kgf / cm 2;
● depth - 8-9 cm.
The service life of Global radiators is 20 years, while the manufacturer provides its own 10-year warranty.
Rifar radiators (Rifar heating batteries)
Domestic bimetallic heating radiators. Devices differ in reasonable cost. Due to the use of a special manufacturing technology, they are direct competitors of foreign manufacturers of heating equipment.
On the company's website, the site contains four lines of Rifar batteries:
● Rifar Base radiators. Products from the Basic range are the golden mean between price and quality. Like other radiators of the company, they are assembled from high quality metals. At the same time, the series includes three models of radiators: Base 200, Base 350 and Base 500, where the numbers correspond to the power value in W. To obtain the maximum performance of batteries from the basic series, you should use a specially prepared coolant with a minimum salt content.
● Rifar Base Ventil radiators. This is a modified version of the Base series. Its only difference is the presence of additional fittings for the implementation of the lower connection to the heating system.
● Rifar Monolit radiators. Manufactured using monolithic technology. Here, the battery sections are joined together by welding, forming a single structure. They are designed to operate in the harshest environments. So, according to the manufacturer, Rifar Monolit radiators are capable of withstanding pressure up to 150 kgf / cm 2.
● Rifar Monolit Ventil radiators. As in the case of the basic line, the "Monolith Valve" is a modified version of the "Monolith" with additionally mounted branch pipes for the bottom connection.
Aluminum heating radiators
Aluminum radiators are classified as the most calorific, due to physical properties the material from which the batteries are made. However, their use in centralized heating systems is not recommended, due to the increased requirements for the acidity of the coolant.
Large cross-section of intercollector pipes makes aluminum radiators excellent substitutes for cast iron in heating systems with natural circulation of the heat carrier.
Aluminum has a low specific gravity, which greatly simplifies the transportation and installation of radiators based on it. The aesthetic qualities of aluminum radiators allow installation in almost any room, regardless of the design style.
Radiators Global (heating batteries Global)
Global aluminum heating batteries in Russia are represented by only two lines: ISEO and VOX. This is due to the fact that they the best way suitable for domestic heating systems.
The VOX series are the classic Global sectional aluminum radiators. Despite the modular structure, they are designed to work under pressure up to 16 kgf / cm 2. High heat transfer rates (150 W from 35 cm section and 181 from 50 cm) allow efficient use of heat carrier heat even with a minimum number of sections.
Globex ISEO heating batteries are monolithic structures that are designed to work in extreme operating conditions. They not only perfectly withstand high pressure, but due to a special fluorine-zirconium layer they are less susceptible to corrosion and chemical attack. Globex ISEO batteries can be used in systems with poor quality coolant.
Where to buy heating radiators for home
You can inexpensively buy heating radiators for heating private houses and cottages in our online storekermi - fko .ru.
Discounts and bonuses for regular and wholesale customers!
Heating radiators in Moscow with delivery throughout Russia.
We will always help you find the best prices and materials.
Send any data to the mailkermi - fko @ mail .ru
Household heating radiators presented in our catalog are divided into three types: aluminum; steel and bimetallic sectional batteries.
To help you with the choice, we will tell you about the advantages and disadvantages of each type:
Aluminum radiators are very popular among owners of private houses and apartments. They have excellent heat dissipation, light weight and attractive design. The biggest disadvantage of aluminum batteries is their sensitivity to chemical composition coolant, which makes them unsuitable for use in high-rise buildings with a central heating system, where salts and additives added by public utilities to prevent blockages of risers enter the heating system along with water. Also, during operation, hydrogen is released, which can lead to airing, which means that the structure must have valves to bleed excess air.
Steel panel radiators can be used even at low temperature of the coolant, they are durable, energy efficient and are rich in size. However, the pressure in them is usually low, which makes them unsuitable for use in high-rise buildings with a central heating system (at a standard level of pressure in the system). But they are ideal for an apartment with autonomous heating.
For bimetallic radiators, all surfaces in contact with water are made of steel, and the elements responsible for heat transfer are aluminum. This combination of materials provides excellent heat transfer, the ability to maintain high pressure in the system, and corrosion resistance. Bimetallic batteries are not demanding on the quality and chemical composition of the coolant, they are ideal for apartments in high-rise buildings, and will last a long time. The main disadvantage of such heating radiators is the price.
All models in the catalog have wall mounting and should be located at a distance of 7 - 10 cm from the floor, 10 - 15 cm from the windowsill and 3 - 5 cm from the wall. The efficiency of the heater largely depends on the correct location.
What to consider when choosing
Before you buy a heating battery, please note that for heating 1 sq.m. rooms with a height of 3 m require 80 - 100 W of heating power. Thus, the power of the heating batteries in such a room should be 10% higher than the calculated one. If the room has large windows, then the power should be 20% higher than the calculated one.
We have established recommended retail prices for heating batteries, which are broadcast to us from manufacturers. When making a purchase in our store, you can count on free "home delivery" in Moscow within the Moscow Ring Road, as well as low-cost delivery to Russian cities to the warehouse of a trading company or point of delivery. Also, deciding to buy a heating radiator for your house or apartment in VodoParad, you can count on a manufacturer's warranty of at least 5 years.
