Crafts from plastic bottles of 30 liters. Do it yourself: handicrafts from plastic bottles for summer cottages and houses (23 photos). Children's crafts from plastic bottles. Frog

Many summer residents use a variety of materials at hand to decorate their site, one of the simplest options is to make various decorations from plastic bottles... The use of this option has a lot of advantages: cheapness and availability of material, ease of work and the ability to make a wide variety of crafts. You do not need to have special skills and use a special tool, everything is very, very simple.

What you need to work

As you know, plastic bottles are often simply thrown away, meanwhile the material can be given a second life, especially since it takes very little for this:

Important!
Remember that all products will be located outdoors and will be exposed to many adverse effects: the sun, high humidity, temperature changes, and so on.
That is why it is necessary to use weather-resistant compounds that are able to maintain color and structure for at least several years.

Basic use cases

As noted above, you can make a variety of crafts from plastic bottles for summer cottages. It is important to choose the option that you like and that will organically blend into the atmosphere of your site.

Palm trees

A very popular option due to a fairly simple workflow and an excellent result in the end. The most important thing is that, having learned how to make palm trees, you can easily make any other tree, since the principle of operation is exactly the same.

Let's consider the manufacturing technology in stages:

• For work, you need a knife or scissors, wire or a metal rod for making the frame and the bottles themselves... It is best to use green products for the leaves, and brown for the alignment. In extreme cases, the trunk can be painted, but the branches are still better to be made initially green.
• First, brown bottles are cut in half and prongs are cut along the top edge as shown in the photo... It is worth considering that for work you will need a very a large number of blanks, so take care of the necessary stock in advance so that work does not stop halfway.

• Next, a strong pin with a diameter of 5-8 mm is taken, you can use fittings, or any other metal elementsuitable for height... It should be borne in mind that part of the element will go into the ground, for reliable fixation; for large crafts, even concreting of the base may be needed in order to give the necessary stability.
• Further, the blanks are strung on a pin, after which the corner elements are bent to make the trunk even more natural and similar to a real tree... Of course, you don't have to make the folds, but with them similar crafts from plastic bottles for a summer residence they look much more interesting.

Important!
Remember to remove bottle labels well in advance, as they may ruin appearance finished product.
Sometimes they come off easily, and if it is difficult to remove them, then you can put the products in hot water for a few seconds - then the process will be much easier and faster.

• Next, green products are taken, first of all, the bottom is cut off in them, after which the petals of future branches are cut... They can have a wide variety of configurations - from straight to curly cut. Everything again depends on your desires and preferences, the fantasy is not limited to anything.

• Next, the finished leaves are strung on pins, after which they can be bent to make them even more natural.... Last of all, all the elements are connected to each other, the easiest way to do this is by welding, but if there is no equipment, then you can use special clamping clamps, which are sold in all hardware stores.

Flower beds

Compact flower bed:

• You can take any container as a base, the main thing is to choose the optimal size, a barrel cut in half, a stack of car tires or something else will do.
• Next, the base is installed in the right place and a cement-sand mortar is prepared in a ratio of 1 part of cement to 2 parts of sand. Water is added until a thick sour cream consistency is obtained.
• Next, bottles are taken, while both plastic and glass products can be used... The walls of the container are coated with a thick layer of solution, after which the necks of the bottles are stuck into it. The rows are staggered, you can use options of different colors to get a pattern or ornament.

• After the solution has solidified (after 1-2 days), the container can be filled, the lower layer - gravel or crushed stone, it will serve as drainage, and the upper layer - fertile soil, into which the flowers will be planted... The solution, which is visible from above, can be decorated with any available material.

Compositions from bottoms

The instructions for making such a composition are quite simple:

• Half bottles are taken, they can be of various colors, this allows you to create the most unusual compositions.
• A slide is poured from the soil, and the halves are stuck into it, depending on the shape of the slide and the color of the elements, you can create any flower beds.

Decoration of flower beds and beds

You can not make full-fledged crafts from bottles for a summer residence, but use them as decorative element, which, among other things, also has a practical function, which we will consider below:

• You can take products of the same color, or you can use any options, but later they will have to be painted to improve the appearance of the composition... The most important thing is that the size and shape of the bottles are approximately the same.
• Next, you need to cut off the necks approximately at the point where the narrowing begins, after which the resulting containers are filled with white sand or black soil - this will make them stiff and easier to install.
• Filled blanks are dug in along the perimeter of flower beds or beds, such a design will help give the summer cottage originality... In addition, such improvised fences allow to exclude spillage of soil on the paths - they can be sprinkled with gravel to further improve the look of the garden.

Pots

Another very attractive option is flowerpots, such crafts from plastic bottles for summer cottages are very easy to work with, but the result is excellent.

Several options can be distinguished:

• The simplest solution is to cut off the top of the bottle (then you get a straight pot) or its bottom (then you get a conical one). Naturally, it is best to use large containers, they can fit almost any plant. Products can be decorated with paints, stones or shells - it all depends on your imagination.
• You can cut off the side of the bottles and make hanging pots, this way you can decorate any wall... This option allows you to design nondescript surfaces.

• Large containers can be used to make pots in the shape of various animals or birds., this option is somewhat more difficult to implement, but the result is much more interesting and attractive.

Other options

Do-it-yourself dacha crafts from plastic bottles are not always large, they can be very tiny decorative elements.

There are a lot of options, and we will consider only a few of them:

• From the bottoms, which often remain in the process of work, you can make various figurines of animals or fairy-tale characters... In this case, staining is also required in order to achieve maximum similarity.

• Using a grid with large cells, you can create a floral arrangement... You can do it even easier: create just flowers in which the bottom of the bottle will be in the middle, and the cut elements will be the petals. How the plastic is cut depends on what happens in the end.

• If necessary, even a fence can be decorated with bottles - such a fence will serve long years and will perfectly fulfill its intended purpose - protection from the entry of animals. (See also the article.)

• You can do this: just decorate the products in the form of fairy-tale characters and put them in the garden or in the vegetable garden... Children like such figures very much, while you can create a whole fairy-tale world in how many hours.

Using plugs

In the process of work, very often a large number of covers remain, which can also be used to make quite interesting products and compositions:

• Corks are great for creating bright and elegant curtains for the garden... The process of their manufacture is extremely simple: each cap is pierced with an awl or a screwdriver with a thin drill, after which all elements are strung on a fishing line or cord.

• Another entertaining option is to create paintings from lids.... You can make any composition, the more elements are used, the more colorful the picture will turn out.

Output

You should not throw away plastic containers, because with their help you can make your country cottage area unique. The video in this article will clearly show some of the manufacturing options under consideration.

The more trembling we treat our site, the more pleasure we strive there not only for work, but also for recreation. When we decorate garden plot with your own hands, it becomes even dearer and more attractive. This can be done using original figures made from the simplest and most affordable materials, for example, from plastic bottles. Indeed, plastic is easy to cut, shape, paint and retain its shape for a long time. The main thing is to show imagination and devote some time to work. The following are possible options figurines suitable for any garden area.

Palm

Making a palm tree from plastic bottles is a fun and uncomplicated process. Therefore, a large number of summer residents decorate their plot with this exotic plant. If you want to join their ranks, stock up on a large number of plastic containers of different sizes (best from 1.5 to 2.5 liters) brown and green.

Trunk

The wings consist of two parts: the upper one is assembled from small feathers cut from the bottoms; the lower one is more complicated. First, you need to cut out the middle part of the bottle, cut into two parts, and then each of them into rectangles of the same size.

• With scissors, the bottle is cut according to the marks made, while the neck remains in the upper part - it is necessary to secure the swan's neck in the hole.
• The neck frame is made of a hose with wire. It is pushed into the neck and given the desired shape.

• Feathers are cut from a small plastic bottle. For this, the bottom and neck are cut off, and feathers of any desired shape are made from the remaining cylinder. It is best to cut the edges of the feathers a little in the form of a fringe, and warm each feather on the outside with a candle.

• Feathers are collected in two pieces and fixed with wire.
• For the neck it is best to use small bottles without a bottom, which are threaded onto the hose upside down. They will need at least 15-20 pieces.
• In the place where the hose ends, you need to make 2 holes in the bottle and the hose itself. Pull the wire through the holes and fix it.
• The beak itself is best made from a large cap (usually bottles with chemical preparations). The cap must be cut into 2 parts so that a shape resembling the letter "M" is obtained. The finished beak should be painted.

In conclusion, the most favorite plants should be planted in the finished swan.

Making swans from plastic bottles is a process that requires care and accuracy. But the result is a very cute and practical craft.

Christmas trees

Of course, almost every vegetable garden has live trees, but this does not mean at all that there is not a little place for a beautiful "artificial" Christmas tree. It can even be decorated during the New Year's celebration in the country.

It is necessary to prepare in advance plastic bottles of different volumes - 2; 1.5 and 1-liter. For a Christmas tree with a height of about 1.2 meters, you will need at least 35-40 green bottles, washed and dried. For manufacturing, you will need more scissors, a candle, a pin.

Manufacturing process:

• Cut off the bottom in each bottle, and cut the side walls into strips about 1.5 cm wide and round off their ends. Coniferous twigs will look even more interesting if you melt them a little with a candle with the same pitch (about 2 cm).

• To build a tree trunk - for this it is best to strengthen an iron bar in the ground.
• Fasten on the base of the twigs: simply string 2-liter, then 1.5-liter, and 1-liter bottles on top of the trunk with the bottom down.

• If containers of the same volume are used, then after assembling their branches, you can simply cut them so that the tree turns out to be conical different shapes... The lower branches must be straightened, and the upper ones can be left in their original position.

That's all, the Christmas tree from the plastic bottle is ready.

Lamb

In 2015, it is simply impossible not to decorate your summer cottage with the symbol of the coming year - a lamb. She will surely bring good luck to the whole family. The creation of such a figure is a rather large-scale event, but the result is also impressive.
For work you will need:

• Plastic bottles: for legs - 4 pcs. 1.5 l and 4 pcs. 2 l each; for the torso - 7 pcs. 2 l each; for the head - 3 pcs. 1 l each; for a fur coat - about 20 pieces of 2 liters each (it is important that they have curly bottoms).
• Copper wire is best.
• Spray paint (white and gold).

A sheep from plastic bottles is performed in the following sequence:

• The necks are cut off from two 2-liter bottles, and their bases are inserted into each other. Long, but narrow ears are attached to them with the help of a wire.

• Connect 2 liter bottles as torso and neck. First, the base is made, and then other bottles are attached to it with the help of wire or tape.

• The head is fixed on the neck.
• The lower part of the legs is made of 1.5-liter bottles, and the upper part is made of 2-liter bottles. The legs are tightly fixed to the body with wire so that the sheep does not dangle on them.

• Curly bottoms from 2-liter bottles are cut off and connected with wire. Thus, a sheep's fur coat is obtained, which covers the body. It is fixed on the stomach.

• The eyes are easiest to make from corks.
• The finished sheep can be painted first with a white spray, and then sprayed with a little gold paint on top of it.

Such a lamb will look great in summer surrounded by greenery and flowers.

Penguins

Craft penguin from a plastic bottle is a cute and funny creature that can be used to decorate both home and garden. This figurine is made quite simply, so your children can become full-fledged assistants in this process.
To make penguins you will need:

• 2 plastic bottles, 2 liters each;
• colors of yellow, black and white flowers, as well as a brush for them;
• pompon;
• braid;
• glue (good if you have a hot glue gun).

Manufacturing process:

• The bottles are cut crosswise into 2 equal parts.

• The lower parts are used. They must be inserted into each other. The halves can be fixed with glue, but without it, the parts are held together quite firmly. The bottom of one bottle serves as a head, the bottom of the other acts as a penguin's paws.
• Next, you need to decorate the penguin figurine - first in the basic white color, and then depict the characteristic penguin toe with black paint. The cap can be made in any color (in our example, it is blue). To bring the penguin to life, he needs to draw eyes and a nose.

For people with imagination and skillful hands, it will not be difficult to turn unnecessary things into real masterpieces. Craftsmen and beginners alike use plastic bottle crafts for interior decoration, garden decor and practical furniture. Colored plastic bottle caps are a great material for mosaic murals on walls and hedges. Best ideas from detailed instructions and the photo is easy to embody in the country, turning the bare area into a "meadow of fairy tales", and fill the house with useful little things.

Important advantages of crafts from plastic containers

A well-made souvenir or trinket will eventually grow into a hobby if there are no limits to imagination. Summer residents do not cease to admire, having moved from simple hedges on a wire to buildings that delight in scope.

From the available material, which many throw away, someone constructs:

• greenhouse;
• carport;
• summer shower or bath;
• country toilet or a shed;
• summer gazebo or sun shade;
• teremok for children or playground;
• sandbox with decorative bumpers;
• various temporary buildings on the site.

The main advantage of such structures is available material... With reliable fastening of the elements, the walls of the building are aesthetic and completely reliable. It all depends on how the plastic bottles are connected. If you approach the matter thoroughly, the desired result will impress even experienced builders.

Plastic over time becomes a real environmental disaster - it is difficult to recycle it. But it is worth attracting everyone who is not indifferent to cleaning the territory, and there will be a whole mountain of empty PET bottles for the construction of a greenhouse, a cascade flower bed or vertical gardening. The only drawback is the long collection of the same container, since containers are produced in different colors and volumes.

Some manage to collect enough ornamental material in 1 season, others involve neighbors and friends in collecting plastic. Someone decides to clear the picnic area in order to improve the ecology on the way to the dacha and to collect material. As a result, both plastic bottles are in business, and the territory is clean.

Another advantage is plastic container soft and pliable, easy to cut, no complicated tools required. With little skills, the material itself "dictates" ideas.

To create an original jewelry you need:

• interesting idea;
• ready-made role model (illustration);
• material for crafts with tools;
• step by step guide training plan.

In the hands of a real master, plastic bottles find a second life, becoming functional items. Souvenirs are best done on a seasonal basis. For example, christmas toys they make in the winter, practical dacha buildings - in the summer, and in the spring and autumn it remains to build a "meadow of fairy tales" near the house for children.

Recycling plastic containers is fun for the family. It is not difficult to attract children to him, entrusting a simple part of the work. Do not forget to remind them that do not just make a firebird or "Chunga-Changa Island" with bottle palms, but take care of the environment. You can involve a courtyard or a school class in improving the territory.

Furniture and interior items from plastic bottles

Furniture made of plastic bottles looks like a masterpiece that is not available to everyone. They will need a lot of plastic containers of the same sample. Sofas and poufs impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is done in blocks - seat, back, sidewalls. If the container is not enough, the blocks of the sofa can be made one by one. Better when collecting bottles from under one drink, for example, a two-liter kvass or lemonade.

The principle of "assembling" furniture from bottles is simple - they are laid out in layers and wrapped tightly with tape. To make the furniture softer and more springy, a little air is released from each bottle and screwed tightly. At the place where the lid is, cut a cap from another bottle and fasten it with tape. It turns out a block with a bottom on both sides - this is the basis of the furniture.

Then it all depends on the imagination, the type of furniture and the number of bottles available. We wound up with tape 7 containers of the same volume, it turns out the basis for the ottoman. What will be its appearance and style depends on the master. For a soft seat, you need a round pillow or foam block to fit the top. The cover is cut to fit the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew the upholstery tightly.

If there is not enough furniture for the summer, an ottoman for a summer residence is made from an old wadded blanket and a children's pillow, wrapped around a block of bottles. Old curtains or bedspreads will be used for sheathing. If the pouf should have a presentable look, a newer and more expensive fabric or eco-leather is chosen.

To build a coffee table, you will need 4 racks of plastic bottles and plywood board as a table top that can be hidden with a long tablecloth. In a similar way, they make a comfortable stand for a laptop or a portable table for a summer residence. For large furniture (sofa, chaise longue or armchair) made from plastic bottles, it will take a lot of patience and raw material.

Useful little things for home from plastic bottles

Flowers and vases

Decorating a student's bedroom or children's room with crafts from plastic containers is not difficult. You can build a whole bunch of artificial flowers. Put the resulting chrysanthemums, chamomile or roses in a vase of the same material, complementing the middle with diode bulbs on an insulated wire. This will look like a night light of extraordinary beauty, where a weak light shimmers in the plastic petals.

Advice: To give the leaves a special shape, use heating the blanks and folding the corners with tongs!

To place a homemade bouquet, you need a suitable vessel, just cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make a cut, securing the result by heating the folds. A small transparent bottle is cut off to the very top, about half of a large container is cut off. Choose a material with a ribbed or “waist” in the middle for an interesting base.

Then we do it as our imagination allows, but bend the edges beautifully. A fringed cut is obtained from vertical or diagonal notches of a plastic base. The resulting stripes are bent evenly to the outside.

Note! It is important that all notches and the depth of the slot are exactly the same, then the whole product will come out neat.

Depending on which edge is desirable, the strips of the vase (the edges of any other product) are fixed in different ways:

• curly bend;
• staple staples;
• fusing;
• bonding with transparent polymers.

Planters, flower pots and seedling containers

Colored plastic containers in the form of bottles and bottles of different sizes are suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter cisterns - a cascade of ampelous petunias. Fragrant flowers hanging from cut containers will help to realize the dream of a beautiful corner of paradise.

Large bottles and tanks, cut in half, are hung upside down and with a lid. It is recommended to lay large pebbles at the bottom for drainage. Excess water after watering will go to the plants in the lower rows. Plants are grown in the same containers without soil - hydroponically with the addition of fertilizers. Fresh greens and seedlings (in urban and suburban conditions) are also germinated in prepared plastic bottles.

Advice: Use the compact shape and the ability to hang vertical gardening containers with automatic irrigation. In the absence of the owners, watering cans with water, immersed in the ground, will cope with the moisture of the plants.

Traps and feeders

Use plastic bottles to repel pests or attract birds to your area. To do this, the tank is used as a feeder, and traps from bottles with chemicals are placed at the roots of fruit trees. From a double plastic container, craftsmen construct traps for wasps, where they fly into sweet water and cannot get out.

Suburban area equipment

At the dacha "hastily" it is easy to build handicrafts from plastic bottles in the form of an impromptu washbasin, hanging a full bottle upside down. Unscrew the lid a little, and a small stream of water will help wash your face and hands. It is also worth making a bench and arranging lighting with beautiful owls or gnomes from their plastic. Any garden decor for inspiration - in interesting illustrations.

Multifunctional items for the home

Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.

It is convenient to knit from a similar ball, suspended somewhere nearby, pulling the thread from the ball inserted inside. A nail polish or lipstick collection is easier to find in a makeshift zippered jewelry box.

New Year's decor

Bright Christmas balls, garlands or toys from plastic bottles are worthy use for transparent containers. A transparent ball will come out of one bottle, cut into round strips. After securing the sphere with a stapler, decorate in any way:

• winding "rain";
• pasting with crumbled foam (snow);
• decoration with sequins, beads and stones.

New Year's decor made of white plastic bottles "with a waist" is suitable for snowmen or penguins. You can use black nail polish to paint eyes and other elements, cotton wool (snowball), sequins, small buttons, beads, and whatever is at hand. Funny caps for characters - made of colored socks without a pair, strips of jersey are used as a scarf.

Advice: From homemade winter characters, candles, ready-made tinsel and a couple of pine branches with cones, create an original New Year's composition so as not to buy a Christmas tree.

Curtains made of colored plastic caps and bottles

Space zoning is a popular design technique, where a self-made translucent curtain is often used. Original curtain able to decorate any living space, cottage or covered terrace. Original hanging partitions made of unusual materials are widely used in the interior.

In modern decor, plastic is in demand, including bottles and caps for them. There are options for curtains:

• from scraps of the bottom of small containers - strips on a thick fishing line, swaying when air moves;
• from colored lids - a fancy panel made of tightly strung elements;
• a garland of plastic and lights to give the curtain on the diodes more aesthetics.

Original all-season flower beds

The summer season passes, and natural flower beds are replaced by homemade plastic flowers, which are not inferior in beauty to the real ones. Their advantage is the ability to decorate the territory at any time. These flower gardens fade against the background of living plants, but in early spring and in late autumn only they attract enthusiastic glances.

Small plastic containers are needed for daisies. white (petals), yellow (middle) and green (leaves). You will also need an awl and a candle (for warming up), "liquid nails", scissors and a stiff wire in green insulation.

Cut the base of the white bottle to the center, marking out 16 segments - these are the petals. We bend the neat edges over the candle flame, we also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on a green wire, closing with a middle. Fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe curved over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.

From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give the desired shape, warming up over a candle flame. We attach the leaves on the wire handle, they should bend around it slightly. It remains for the chamomile to make several "companions" and find a worthy place for the bouquet.

Using patterns and imagination, it is easy to build plastic lilies of the valley, roses, chrysanthemums or tulips. This requires plastic suitable color, from which several layers of petals are made to achieve the resemblance to natural flowers.

All-season flower beds include mosaic compositions made from containers filled with earth. Wall panels are made from the covers. "Butterfly" or "ladybug" - in different versions.

Crafts from plastic bottles for the playground

The incredibly beautiful bird with plastic plumage is a whole "meadow of fairy tales". These are peacocks or firebirds, swans, pigeons, bullfinches and parrots. They are all made from empty PET bottles according to the general principle:

1. Design an aesthetic bird head with eyes and beak;
2. Build the torso and neck;
3. String on plastic plumage;
4. Equip with wings and tail;
5. Place on the feet or fasten to the selected surface.

Plastic swans can be fenced off by a blue "lake" of inverted plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose themed décor, such as a desert island with palm trees and parrots.

Plastic animals, birds and insects, familiar to our latitudes, as well as favorite fairy-tale characters are complemented with other materials. Tires, wood and empty containers that are easy to paint will be used.

How to make decorations from plastic bottles for cottages and gardens

An original garden decor made from scrap material is another way to add personality to the site while the young plants take effect. Green plastic bottles make it easy to make funny frogs at the edge of the pond, watching dragonflies and butterflies from the same material.

Palm trees are a popular garden decor, consisting of trunks (up to 15 brown bottles) and palm leaves (green plastic 5-10 pcs.). It is a simple process that even children are willing to participate in.

Prepared brown cups with notches are strung on a thick steel rod (bamboo rod), after piercing the base. It is better to use brown containers (1.5-2 liters) whole, cutting in half, then you will have to punch only the bottom.

We leave green bottles without a bottom and a neck, except for the last one with a neck, which is needed as a loop. We cut these containers lengthwise into 3 parts to a loop and cut them like leaves. If longer leaves are required, use a stapler to attach the other half of the leaf. All parts of the stem are strung on the base and attached to the top, connecting with a common loop. It remains to reliably install on the site "exotic guests" with a lush crown.

The material is collected for a whole year, but it is easier to connect neighbors and acquaintances to the idea of \u200b\u200b"ecological" cleaning. There are special containers for plastic in the yards - it's much easier to type.

Preparation for work - removing labels and glue residues from plastic bottles, it is important to rinse well and discard deformed material.

If vertical fences are being built, they need to be filled. Depending on the idea, sand, stone chips or dry soil are poured into PET bottles, burying 1/3 with the neck down.

For selected purposes, plastic of different elasticity is used. Heat treatment is required for filigree work (flowers). It is important not to overheat the slices cut into strips.

For fairy-tale characters, additional painting is sometimes required. For example, it is better to cover pink piglets for a playground with an aerosol from a spray can, securing it with transparent acrylic paint.

Plastic bottles are great stuff in the right hands. Using them as a basis, it's easy to teach children a lesson in environmental education and fill a house or lot with practical things. With a creative approach, the color, volume and shape of plastic bottles will themselves suggest new ideas for an exciting creative process.

69 photos of craft ideas from plastic bottles

Plastic bottles are an inexpensive and affordable material from which you can make many unique and distinctive things that can not only decorate your garden or yard, but also bring practical benefits. At the same time, you do not need to have the skills of locksmith or construction work, as well as buy expensive tools and equipment. The instructions below will help you implement the most unusual ideas.

Flowers from polymer containers

Start the creative decorating process suburban area you can by making flowers from plastic bottles for the garden. This does not require much effort from you, and the result will exceed your wildest expectations. Having got used to it, you can make not one flower, but an original and unusual flower bed, which will delight the eyes of all the inhabitants of the cottage and its guests.

Before starting work, you must prepare the following materials:

1. The required number of polymer containers... Garden crafts made from plastic bottles of the same size and shape will not look very attractive, therefore it is advisable to diversify the raw materials. Remember than bigger size bottles, the larger the corollas of flowers will be.
2. Acrylic paint... It is used for staining plastic, therefore, before purchasing, you must check the instructions for use and make sure that the selected composition is suitable for application to a plastic surface.

Advice!
If your bottle garden is "grown" from already painted containers, you do not need to buy paint and apply it to the parts, which will speed up the manufacturing process and reduce its labor intensity.

Further work is done in the following sequence:

1. The neck of the bottles must be cut off. It is not necessary to remove a large amount of plastic, it is enough just to separate the plug itself and the shoulders. The rest of the container will go to the petals and whisk.
2. Using a garden knife or office scissors, petals of a suitable size and shape are cut out of the bottle. Do not separate them from the bottom of the bottle, as the latter will protrude in the middle of the bud to which the "stem" is attached.

1. To give the petals a more natural shape, they can be rounded. A knife or a metal rod heated with a blowtorch or gas burner will help in this. Your first plastic bottle craft projects for the garden are not going to be perfect, but as you get more experience, your craft will look better.

1. You can also make a multi-layered flower. To do this, a second, cut in the same way, is attached to the first part with the help of an awl and wire.
2. The last step is attaching the stem. The material for it will be a metal rod, a wooden stick, a strong wire, and so on.
   You can decorate a flower leg as follows:

• cut out a tape from another container, with which to wrap the stem, and then fix it by melting both its ends;
• wind a green hemp rope around a rod or stick, which is glued with PVA glue.

Note!
Crafts from plastic bottles for the garden do not have to be large and tall.
Low small flowers also look attractive.
It is only necessary to organically fit them into the landscape.

Useful devices

DIY garden crafts from plastic bottles can deliver not only aesthetic pleasure, but also perform many useful functions. The scope of their application is limited only by your imagination.

Solar Water Heater

If you have not yet had time to install an electric or gas heater in your country house, a solar collector will help to ensure that the water in the shower is heated to a comfortable temperature.

Like other crafts with plastic bottles for the garden, this device is made from plastic containers without the use of complex and expensive equipment. The price of hot water in this case will be zero, which, among other things, will help you save on utility bills.

So, to design the collector, you will need the following materials:

• plastic bottles with a capacity of 2 liters;
• empty milk bags;
• polymer pipes with a diameter of 100 and 20 mm;
• fittings for plastic pipes (tees, corners and plugs);
• glue for joining plastic parts;
• matt black paint;
• sandpaper;
• duct tape;
• paint brush;
• hacksaw for wood;
• mallet.

For the convenience of presentation, the manufacturing process itself should be divided into several stages:

1. The bottom of plastic bottles is cut off, after which they are inserted in pairs into one another and glued together. It is necessary to ensure that the seam is tight.
2. The frame is assembled from the pipes. Parts with a diameter of 100 mm are needed to form a frame, and smaller ones (20 mm) are suitable for connecting bottles to each other in a common network. Use fittings in the right places.
3. The entire manifold is mounted on a plywood sheet lined with black milk cartons. The pipes are also painted in the same color. This will help increase the heat absorbing characteristics of the parts and increase the efficiency of the entire device.
4. The finished structure must be installed on the roof of the house or its southern wall. The collector should be fixed at an angle to receive maximum UV rays.

According to the inventor's assurances, the collector panel, with an area of \u200b\u200b1 sq. m. effectively warms up water sufficient to wash one person.

Growing plants

What else garden crafts do it yourself from plastic bottles can be useful? Naturally those that help in growing plants. We are talking about containers for seedlings, as well as devices that help water the lawn and garden in the summer.

It is not difficult to make both the first and the second product. It is enough just to cut off the neck of the bottles and make holes for drainage or dispersion of water.

If you paint a pot or diffuser with acrylics, you get a garden decoration from plastic bottles that will carry a payload.

Buildings and constructions

House

Immediately after buying a suburban land plot, any summer resident wants to build a dwelling there in order to hide from the weather, store tools and just relax after hard work in the garden and vegetable garden.

Therefore, talking about what kind of crafts for the garden with your own hands you can make from bottles, it will be useful to mention the possibility of building a temporary (and, perhaps, permanent) residential house out of them.

Before replacing traditional bricks or cinder block with plastic containers, read the following tips:

1. The bottles need to be filled with river sand. This will increase their strength and reduce the thermal conductivity.
2. It is recommended to lay a reinforcing metal mesh between adjacent rows, which will additionally strengthen the finished structure.
3. The cement mortar does not stick to the plastic, therefore, many holes must be made in each bottle, which will enable the assembly mixture to interact with the sand inside the container.
4. During laying, it is advisable to fix the necks of the bottles with twine or wire until the solution is completely solidified. This will prevent the wall being built from creeping.

Note!
The polymer from which the bottles are made loses its properties over time from exposure to adverse environmental conditions.
Therefore, do not expect that your house will live for more than 5-10 years.

Other building elements can be made from the material in question:

1. Shingles. To do this, the plastic bottles must be warmed up in the sun so that the polymer softens a little, and then compressed using a steel or wooden sheet with a load on top.
2. Slate. It's even easier to make. It is necessary to remove the neck and bottom of the bottle, and then cut it lengthwise into two parts. You can fasten the resulting elements together using adhesives. You just need to carefully monitor the tightness, otherwise your roof will leak.

Gazebos and greenhouses

However, these are not all the ideas for a plastic bottle garden. After all, this material can be used to design a gazebo or greenhouse, replacing it with expensive polycarbonate or fragile glass. Polyvinyl chloride, from which the containers are cast, has similar consumer properties.

The work on making the gazebo is carried out as follows:

1. Using wooden beams, metal corners or polymer pipes, you need to make the frame of the future structure.
2. Use a drill, awl or hot knitting needle to make holes in the bottom of each part. Then all bottles are strung on a line or twine, the length of which is slightly greater than the height or width of the frame.
3. The resulting bunches are fixed both along and across the frame. The layers need to be additionally tied together with wire to reduce bottle vibrations in windy weather.
4. You can give an attractive appearance using containers of various colors and sizes, creating a beautiful ornament from them.

The pergola and greenhouse are erected similarly to the gazebo, so there is no need to describe this process in detail.

Parking space

Few of motorists like it when their "iron friend" stands under the scorching rays of the sun, rain or snow. Therefore, many people build carports for cars, using corrugated board or polycarbonate for this purpose.

However, a regular plastic bottle will work just fine. The resulting design will cost you inexpensively, and with the proper imagination, you can make a canopy that will serve as one of the decorations for your summer cottage.

The work must be done like this:

• a hole is made in the bottom or cork of the bottle, after which a fishing line, cord or wire is fixed there;
• then the resulting blanks are attached to the frame, forming dense rows;
• so that the protective coating is not excessively mobile, the bottles can be additionally cross-linked;
• to protect from sunlight, it is advisable to paint the parts with acrylic paint before installation.

Output

Bottled garden crafts are not only a way to save money on the purchase of certain tools or decorations. With their help, you can show your creative inclinations and highlight your individuality.

You can find even more ideas and ways to implement them by watching the video in this article.

The amount of garbage that each person “produces” grows from year to year. The problem is becoming global, as flying plastic bags and plastic bottles scattered everywhere have already made everyone's eyes callous. I am grieving, it turns out, you can help, and even for the benefit of yourself. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts from plastic bottles can be made in literally a matter of minutes. Well, or the clock ... Depends on the scale.

The buildings

PET (polyethylene terephthalate) is the thermoplastic from which bottles are made. It will be useful to know its physical properties:

• density - 1.38-1.4 g / cm³,
• softening temperature (t melting) - 245 ° C,
• melting point (t pl.) - 260 ° C,
• glass transition temperature (t st.) - 70 ° C,
• decomposition temperature - 350 ° С.

Plastic bottles are very convenient to use, but harmful to the environment, as the polyethylene from which they are made takes more than 200 years to decompose. The same property allows the use of practically waste raw materials as construction material... Craftsmen are already building houses from plastic bottles, as well as sheds, summer cottages, hotbeds, greenhouses, fences. Various technologies have been worked out - the approach is quite serious.

How to build a house from plastic bottles

The main idea is to pour bulk material into bottles, screw them with lids and use them as bricks. The bottles are filled with sand and soil. Sand is preferable, as there is too much plant debris in the soil that can rot. It must be sieved, dried, filled into bottles, well sealed, filled up to the very top. It turns out a kind of bricks.

To build a house from plastic bottles, you will need a solution that is used to fill the gaps between the "bricks". There are options here too. It can be an ordinary mortar that is used when laying brick walls, you can make a clay mortar. To keep the "bricks" in the wall until the mortar grasps, they are tied with twines from the side of the lids. Later, these "mesh" will come in handy when you plaster the walls. They turn out to be uneven, so alignment is indispensable.

We make a greenhouse, shed, greenhouse

You can build a greenhouse or greenhouse out of plastic bottles. In this case, only transparent plastic is used, since it is necessary that the light passes through in sufficient quantity. For the construction of a barn, on the contrary, it makes sense to choose a darker plastic - it will be less visible what's inside.

The first technology - one to one

The second requirement for bottles as a building material is an even shape. Such, you know, without notches. Otherwise, it will not work to fold the walls so that they retain heat - it will "siphon" into the curly cutouts. Remove labels from bottles and dry. It is also necessary to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse / shed from plastic bottles.

For the construction of a greenhouse or shed, pillars are dug in at the corners. Frames are assembled from the timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and, in a ready-made form, attach to the dug-in posts. When making frames, don't forget the doorway and windows.

We build a frame, cut off the bottom of the bottles, string them onto a pin. From such "columns" we assemble walls, a roof

The construction process begins with cutting the bottom. We string the cut bottles on the pins, directing the necks to one side. We insert the bottles with effort so that they become very tight. Having collected a row of the required height, we attach it to the frame. You can fasten it with clamps, strips cut out of metal, nails ... in any way available to you. We press the second row to the first so that there is a slight deformation. In this position, we fix it. So, row by row, we collect all the walls, then the roof.

Using the same technology, you can make a gazebo. But there is no need for tightness, so you can collect curly and colored containers. It will turn out even more interesting (example - in the photo).

The second technology - we sew plastic

Bottles will also need smooth, transparent or yellow. The central part is cut out of them, obtaining a square-shaped piece of plastic. The pieces are sewn together in long strips. In the strip, the pieces are positioned so that they twist to one side. Then the strips are sewn into linens. To make the canvas even, the stripes are positioned so that they curl in different directions. As a result, they align each other. Finished canvases are nailed to the frame. This completes the construction of a greenhouse for their plastic bottles.

Such a plan "casing" for greenhouses tolerates winters very well, it does not need to be removed. Due to the stitching (many small holes), there is no absolute tightness, which makes it possible to regulate the humidity. You will not be able to heat such a greenhouse, but it will push back the autumn and accelerate the arrival of spring.

You can sew plastic for your greenhouse by hand, but it's not easy. It will be easier for those who have non-capricious sewing machines... Old Podolsk machines cope with this task. Others may have problems.

Fence and enclosure

You can make a fence out of plastic bottles different ways... If you need a solid monolithic fence, you can use the bottles like bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a great risk that it will collapse) - select the color of the plastic to obtain the required rusink. But in this case, you will have to look for "building material" of the same diameter or from different sizes lay out patterns. In general, the process is creative, no matter how you look.

You can also make a filling for a fence out of plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from figured containers and their parts.

Furniture made of scrap materials: recycling plastic bottles

Not only a house and a fence can be made from plastic bottles, they are also used as a basis for upholstered furniture... The idea is to use plastic containers for the frame, not wood. With tightly twisted lids, they have a high bearing capacity, and assembled in blocks, they are quite capable of withstanding loads of up to 100 kg or more.

A bed made of plastic bottles ... you need a good mattress and the base is not too difficult to make

Although furniture is made differently, the general algorithm of actions is the same:

• You select the "building material" of the same height, tighten the covers well.
• Collect blocks the right size, securing them with tape.
• Having assembled the base of the required shape, sew the cover. For softness adding furniture foam rubber.

The trick is to make the bottles fit very tightly to each other and not move. The slightest backlash can lead to structural destruction. Therefore, collect the blocks slowly, carefully securing them. You can stack bottles in layers, securing each layer in several places. For the inner layers, it is better to use double-sided tape - the fixation will be more reliable.

Ottomans / benches

The easiest way is to make an ottoman or a bench from plastic bottles. We proceed in the order described above. It is necessary to find bottles of the same height. It is better if they are of the same shape - it is easier to assemble. From plastic containers with tightly screwed lids, we assemble the base in the form of a cylinder. It is desirable that the radius of the base be greater than the height of the bottles - so the bench will not turn over.

Next, you need to cut two circles from fiberboard, which will be slightly larger than the resulting base radius - this is the "bottom" and the base of the seat. We fix them with scotch tape. We take furniture foam rubber and, according to the dimensions obtained, we cut out the necessary parts. We sew the cover from upholstery fabric, the colors that match the interior.

Such a bench can be not only round. It is quite possible to make a square one. And so that this furniture is not too light, it can be made heavier by pouring water. But water is not a very reliable business. Better to pour sand. Both harder and more reliable.

Sofas, chairs, armchairs

If you need furniture higher than one bottle, proceed as when creating walls for a house. Find "material" of the same shape and height. The first bottle is left intact, the cork is twisted tightly (you can pour sand so that it does not turn over). In the other, the bottom is cut off, pushed one on top of the other. The bottle enters a certain distance and does not move further, no matter how hard you make it. If the obtained height is enough - great, if not - we put on the next one. In this way, collect the rows of the desired height, then fasten them into blocks.

There is another way. It is more reliable in the sense that the bottles do not hold at the expense compressed air, but due to the mechanical stop. And the walls in them are double, which is also important. The downside is more work, more raw materials are needed. The whole process is illustrated step by step.

1. We take the bottle, cut it approximately in the middle of the height (the upper part with a smaller neck).
2. The upper part with the neck (the lid is screwed on) is inserted all the way into the lower one.
3. We take a whole one of the same size and shape, insert it upside down into the prepared structure.
4. We cut the third one by about half and put the lower part on the top (with a lid).

From such modules, we assemble blocks of the desired configuration, fastening them with tape. Do not feel sorry for the adhesive tape. You can first fasten two bottles, then collect blocks of large sizes from the double ones.

As you can imagine, this technology leaves a lot of bottle tops (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical things for the household.

Methods for making flowers

The most common crafts made from plastic bottles are garden figurines and flowers. About garden figurines read There are others interesting ideas, but a lot of interesting animals and insects have been collected. And we will tell you about flowers from plastic bottles below - these are probably those crafts from plastic bottles that bring the most pleasure. The process is simple, there are a lot of possibilities, the result is amazing.

You've probably noticed that the bottom of a PET bottle looks like a flower. All you need to do is find a bottle of a beautiful color, cut off the bottom of it. Now you have already got a pretty flower. In the middle, you can add petals cut from the central part, a core made of a strip of plastic cut with noodles, or glue beads inside, but more about everything.

Using the power of fire

For work, you will need a marker, lighter or candle (it is more convenient with a candle). If available, use a pair of pliers, tweezers or pliers to hold the workpieces while processing. You will also need acrylic paints, you may need glue and beads. The entire manufacturing process boils down to several steps:

There are a lot of options here. Just start doing. Immediately, it may not work out perfectly, but you will understand what and how you can fix it. Look at some more pictures from step by step photos the process of making flowers from plastic bottles.

The most simple

For novice craftsmen, you can try making flowers from simple shapes of plastic bottles for garden decoration. In this case, you can also use milk containers. To avoid staining the plastic, look for colored ones. And it is not so important whether they will be transparent or not. They can be combined to produce flowers of different shapes.

To create such colors, use the part near the neck. It is cut to form petals. Next - warm it up a little, giving the desired bend to the petals, a little paint, a core made of a melted piece with a thread (a bottle of a smaller diameter, a pharmacy will do too). So we got a buttercup.

Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warming up a little at the base). Make the middle whisk from the side of a milk bottle or paint the clear plastic with acrylic paint.

The middle is any bright one. Here is a piece of cork, but you can cut it into thin noodles, roll it up and then heat it. You get a shaggy core.

It's all about the form ... Despite the imperfection, they decorate the site

The topic is actually inexhaustible. Flowers from plastic bottles are made very different. From simple and uncomplicated to very realistic. It's not so much about skill as about different tastes and desires.

Useful home ideas

PET containers were so good stuffthat a lot of useful things are made of them. In this section, we have collected useful crafts from plastic bottles that can be used on the farm.

For the kitchen and not only

If you cut off the bottom of a bottle with a capacity of 2-3 liters, you get a bowl or bowl, and so that its edges are even, they can be melted on a heated iron. But so that the sole does not have to be cleaned later, use a special silicone pad. If not, you can do it through a sheet of parchment for baking.

Food container. Plastic is food grade ...

Cut off the threaded part from the same bottle. 1-2 cm of plastic should remain around the thread (the edges are melted using the already known technology). Now it will not be difficult to hermetically close any package: we pass it through the cut neck, wrap it outward, twist the lid.

The bottom of the bottles attached to the bar makes a great newspaper shelf (photo on the right). You can also store umbrellas.

Containers of various shapes can be weaved from plastic cut into strips. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. It is necessary to cut in a spiral - as a result, rather long stripes are obtained. If their length is not enough, they are perfectly sewn.

Lampshades

You can even make a lampshade, but on one condition: you will use such crafts from plastic bottles in lamps with - only they almost do not heat up. Plastic is incompatible with other lamps. Let's describe three ways to make a lampshade from a plastic bottle.

The first. Need a large bottle. We draw it into strips of the same width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole, cut. Straight stripes are obtained.

When the strips are cut, we also make a hole in the bottom, pass thick fishing line through the neck, take out through the hole in the bottom, with back side we fix the decor. You can - a button, you can - a pebble of a suitable color. Now by pulling the line, we get an interesting shape of the lampshade. You can put a low power light bulb in it.

Another lampshade was made using a similar technology. But then a part of the bottle with a neck was cut into strips, the strips were wrapped and fixed on the neck. To give the desired shape, the fold can be slightly warmed up over a candle or lighter flame. We attach the resulting "flowers" to the base. So we get an unusual design.

They also make lampshades from the bottoms. It is necessary to find a sufficient number of identical bottles, cut off the bottom of them, glue them together with a universal glue (choose transparent). The main thing is that it glue the plastic and freeze quickly.

Flower vases

Making a vase from a plastic bottle - what could be easier ... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need the thinnest soldering iron. Its power should not be too high. Then everything is simple: with the help of a heated sting, you burn out the patterns.

Magically! To make the drawing brighter, we take acrylic paint and paint the resulting beauty. The paint can be in a regular can, but it is faster and more convenient to use a spray can.

These are the options ...

Photo ideas

Crafts from plastic bottles are such an extensive topic that it is impossible to tell about everything. What's nice, knowing a few tricks, you can easily find out how and what to do by looking only at the photos. So here we have collected a few ideas that seemed interesting to us.

You can even make a boat….

And this is just decoration….